The Model TCCTL “Cut-To-Length” thermocouples can be used for a wide variety of applications including:
For sudden or temporary measurements
Emergency replacements for existing thermocouples
The 1/4” and 6mm diameter thermocouples can be used in standard thermowells
With compression fittings and other accessories
These thermocouples can be customized to the needed length (75mm or 3” minimum) using a standard tube cutter, being careful not to cut into the extension wire insulation. Adding compression or spring loading fittings allows the thermocouple to be adapted to a wide variety of immersion type applications.
注: For 482°C (900°F) Fiberglass cable insulation, change “TT” to “GG” in model number (same price). For 540°C (1000°F) Fiberglass cable insulation, change “TT” to “HH” in model number and add $14 to the price. For a grounded thermocouple tip, change the “U” in the model number to “G” at no additional charge. Note, these cut to length thermocouples are not available in 3mm or 1/8" diameter versions.
Options: Add a standard sized connector by adding “-OTPW” to the model number for additional cost. Add a miniature connector by adding “-SMPW” to the model number for additional cost.
Accessories: Stainless Steel and Brass compression fittings are available for mounting, see “SSLK or BRLK” fittings.
Ordering Example: (1) TCCTL-J-14U-24-40-TT 1/4, ¥8,945 plus (1) TCCTL-J-6U-600-1-TT 6mm Diameter x 600mm Long Type J Thermocouple with 1 meter Long PFA Insulated Cable, ¥8,945, ¥8,945 + 8,945 = ¥17,890
Thermocouple Type : J : Iron/Constantan K : Chromel/Alumel T : Copper/Constantan E : Chromel/Alumel N : Nicrosil/Nisil
Probe Outside Diameter : 1/4 : 1/4 Inch 3/16 : 3/16 Inch 6 : 6 mm 45 : 4.5mm
Junction Type : U : Ungrounded G : Grounded
Probe Length : 24 : 24 Inches 600 : 600 mm
Cable Length : 40 : 40 Inches 1 : 1 meter
Cable Type : TT : PFA Insulated (260C or 500F Max) GG : Fiberglass Insulated (482C or 900F Max) HH : Fiberglass Insulated (540C or 1000F Max) Not Available in Type T