Quick Disconnect Handle/Thermocouple Probe Sets with High Impact ABS or Rugged Aluminum Handles

SDX-SET and HDX-SET Series

Quick Disconnect Handle/Thermocouple Probe Sets

^¥16,255 SDX-SET-GP-J-SMP

注文する

Handles Supplied with 0.3m (1') Retractable Cable – Expands to 1.5m (5')!
In Stock with Subminiature Connector on Cable for Use with Handheld Thermometers
Free Mating Connector Included
SDX-UST Plastic Handle Accepts Both Standard and Miniature Probes/Connectors

熱電対 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

General Purpose Probe:
General purpose immersion probe, 300mm 12" long, grounded junction, 1/8" O.D., 304 SS sheath. Rated to 900°C (1650°F).

Penetration Probe:
Conical tip for insertion into soft and semi-frozen material. 300mm (12") long, grounded junction, 4.5 mm (3/16") O.D. 304 SS. Tip rated to 900°C (1650°F).

Air Probe:
Exposed thermocouple element protected by 3/16" O.D. 304 SS sheath. Drilled end exposes bead to airflow for fast measurements. Constant diameter for easy insertion or mounting into duct work. 300mm (12") long. Rated to 870°C (1600°F).

Fast Response Probe:
Special reduced diameter (1/16") tip designed for fast response. Rugged 3 mm (1/8") O.D., grounded junction, 304 SS sheath. Tip rated to 900°C (1650°F).

Flexible Tip Surface Probe:
Flexible tip conforms to most surfaces for fast, repeatable, accurate measurements. Made from RTV silicone rubber for good thermal contact. 6mm (1/4") O.D. 304 SS sheath. 5/16 OD, overall. Tip rated to 260°C (500°F). Note: subjecting sensor tip to temperatures above 315°C (600°F) will result in tip damage.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

SDX-SET-GP-E-SMP

¥18,205 (税込)
(税抜価格 ¥16,550)

納期: 5 週間

Handle/Probe Set, SDX High Impact Plastic Handle, General Purpose Probe, E Calibration

SDX-SET-AP-J-SMP

¥40,018 (税込)
(税抜価格 ¥36,380)

納期: 5 週間

Handle/Probe Set, SDX High Impact Plastic Handle, Air Probe, J Calibration

SDX-SET-NP-E-SMP

¥23,249 (税込)
(税抜価格 ¥21,135)

納期: 5 週間

Handle/Probe Set, SDX High Impact Plastic Handle, Penetration Probe, E Calibration

HDX-SET-GP-K-SMP

¥19,751 (税込)
(税抜価格 ¥17,955)

納期: 5 週間

Handle/Probe Set, HDX Rugged Aluminum Handle, General Purpose Probe, K Calibration

HDX-SET-NP-T-SMP

¥25,179 (税込)
(税抜価格 ¥22,890)

納期: 5 週間

Handle/Probe Set, HDX Rugged Aluminum Handle, Penetration Probe, T Calibration

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)		(2)		(3)
	-SET-		-		-SMP

以下からオプションを選択:

(1) :
SDX : SDX High Impact Plastic
HDX : HDX Rugged Aluminum

(2) :
GP : General Purpose Probe
NP : Penetration Probe
AP : Air Probe
RT : Fast Response Probe
FSP : Flexible Tip Surface Probe

(3) :
J : J Type Thermocouple
K : K Type Thermocouple
E : E Type Thermocouple
T : T Type Thermocouple

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。