1/32 DIN LED Timer/Temperature Controller

PTC1632 Series

スクロールダウンし、全ラインアップをご覧ください

注文する

1 Second to 100 Hour Timer
2 Cycle Counters
PID Autotune
Universal Input (Temperature Only)
NEMA-4 (IP66) Front Panel

Optional Features:
Low Voltage Power
Green Display

商品説明

The PTC1632 combines a timer and an autotuning temperature controller in an innovative way. The display normally alternates between the timer preset and the measured temperature. The time period or setpoint are adjusted by merely pressing the increment or decrement keys when the preset or temperature is displayed. When an external contact closure triggers the timer, the timer output is de-energized while the time value is shown counting down.

A customize mode displays the number of timer cycles, allows the count to be reset, locks/unlocks preset and setpoint changes, and provides simple switching between °F and °C. A separate cycle counter is also included in the instrument’s configuration mode.

The temperature is displayed in 3 digits with °F or °C. Multi-colored LED’s indicate the controller’s status.

A specially developed PID tuning algorithm provides superb general control. For unique performance requirements, you can select pre-tune followed by manual tuning.

The universal input accepts seven thermocouple types, 2- or 3-wire RTD’s, dc mV, and mA inputs and all inputs represent temperature in °F or °C. No internal hardware configuration is required, and there are no jumpers or switches to change.

For complete product specifications see the Related Links section at the bottom of this page.