カート  |  お問い合わせ  | 
フリーダイヤル 0120-971-357
海外からのお問合せ+81-3-5244-4675

Sanitary RTD Sensors with Thermowell Removable Sensor M12 Connector for use in CIP Clean-In-Place Processes

PRS-TW-M12 Series

Sanitary Thermowell  Removable Sensor  M12 Connector Assemblies for Food, dairy, Beverage and BioPharmaceutical Applications | PRS-TW-M12 Series

¥37,640 PRS-3-100-A-TW-0163-D1-M12

  • Sensor Includes a 4-Wire M12 Connector Plug for Attachment to Process Instrumentation. An M12 Extension Cable is Required for Installation.
  • Clean-In-Place Design for Use in Food, Dairy and Pharmaceutical Processes
  • Standard Mounting Cap is a 1½" 16AMP Tri-GripTM (Tri-Clamp® Compatible) Design, Other Cap Sizes and Styles are Available
  • Removable Probe Assembly is Spring Loaded Into the Thermowell for Good Thermal Response
  • Available with A Variety of Immersion Lengths.
  • Wetted Surfaces are 316L Stainless Steel, Surface Finish = 32 Microinch or Better
  • Process Measurement Temperature Range: -50 to 200°C (-58 to 392°F)
サニタリ - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor includes a 4-Pin, M12 Connector for easy installation using an extension cable.

Sensor Specifications Include:
  • 316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

  • Immersion lengths of 158, 2½", 4½", 7½, and 10½" are available from stock, with others available.

  • Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

  • These sensors can be used with 2-wire or 3-wire systems see information below.

  • Insulation resistance values of 100 megohms minimum at 100 VDC.


  • These sensors are supplied standard as 4-wire assemblies with 4-pin connectors.
    When used in 3-wire applications, use pins A, B and C as shown in the wiring detail below.
    When used in 2-wire systems, connect one wire to pins A or B, and the other wire to pins C or D as shown below.

    Wiring Diagram
    注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)

    他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

    部品番号/Desc.
    注文数
    商品説明
    Quick Ship
      
    PRS-3-100-A-TW-0163-D1-M12
    ¥37,640
    納期: 5 週間
     
    Removable Pt100 RTD sensor with 1½" 16AMP cap, 158" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Quick Ship
      
    PRS-3-100-A-TW-0250-D1-M12
    ¥40,960
    納期: 5 週間
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 2½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Quick Ship
      
    PRS-3-100-A-TW-0450-D1-M12
    ¥44,650
    納期: 5 週間
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 4½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Quick Ship
      
    PRS-3-100-A-TW-0750-D1-M12
    ¥50,740
    納期: 5 週間
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 7½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Quick Ship
      
    PRS-3-100-A-TW-1050-D1-M12
    ¥54,430
    納期: 5 週間
     
    Replaceable Pt100 RTD sensor with 1½" 16AMP cap, 10½" immersion length (U dimension) thermowell, spring loaded with M12 connector
    Accessories
    Quick Ship
    Click to expand/minimize a list of what others bought with theTX-M12-RTD-C-1
    TX-M12-RTD-C-1
    お問い合せ下さい   
    納期: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA Output) with M12 Connections
    Quick Ship
      
    TX-M12-RTD-V-1
    お問い合せ下さい   
    納期: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10 VDC Output) with M12 Connections
    Quick Ship
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-S-F-2
    M12C-PUR-4-S-F-2
    ¥2,645
    納期: 2 週間
     
    2 Meter extension cable, polyurethane jacket with 4-pin M12 female connector
    Quick Ship
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-S-F-5
    M12C-PUR-4-S-F-5
    ¥3,240
    納期: 2 週間
     
    5 Meter extension cable, polyurethane jacket with 4-pin M12 female connector
    Quick Ship
    Click to expand/minimize a list of what others bought with theM12C-PUR-4-R-F-5
    M12C-PUR-4-R-F-5
    ¥3,225
    納期: 2 週間
     
    5 Meter extension cable, polyurethane jacket with right angled 4-pin M12 female connector
    Quick Ship
    Click to expand/minimize a list of what others bought with theM12C-PVC-4-S-F-5
    M12C-PVC-4-S-F-5
    ¥3,055
    納期: 2 週間
     
    5 Meter extension cable, PVC jacket with 4-pin M12 female connector
    Quick Ship
    Click to expand/minimize a list of what others bought with theM12C-PVC-4-R-F-5
    M12C-PVC-4-R-F-5
    ¥3,055
    納期: 3 週間
     
    5 Meter extension cable, PVC jacket with right angled 4-pin M12 female connector

    クイックオーダー

    部品番号
    注文数
    部品番号
    注文数


    このサイトの金額はすべて日本円(税抜)で表示しています
    注: For other cap sizes or styles, other immersion lengths, or for thermistor versions of this product, please contact Sales.

    Ordering Example: (1) PRS-3-100-A-TW-0163-D1-M12 Removable 4-wire Pt100 RTD sensor (100 O at 0°C, Class A accuracy) spring loaded in a 1½, ¥37,640

    部品番号ビルダー

    下記から仕様構成を選択し、ご注文ください
    以下からオプションを選択:


    (1) Nominal Element Resistance :
    100 : 100 ohm @ 0 C (standard)
    1000 : 1 kohm @ 0 C

    (2) Accuracy :
    A : Class A Accuracy

    (3) Insertion Length :
    0163 : 1-5/8" insertion (2-1/2" well stem length)
    0250 : 2-1/2" insertion (4" well stem length)
    0450 : 4-1/2" insertion (6" well stem length)
    0750 : 7-1/2" insertion (9" well stem length)
    1050 : 10-1/2" insertion (12" well stem length)
    注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
    ご不明な場合は、カスタマーサービス(0120-040-572 もしくは esales@jp.omega.com)へお問合せください。