コネクタ付シース熱電対（M12型）
耐熱：-50〜120°C

M12TXSS

コネクタ付シース熱電対（M12型）| M12TXSS

スクロールダウンし、全ラインアップをご覧ください

注文する

Programmable Transmitter
M12 Connection
4 to 20 mA Output = 0 to 100°C Default Setting
-50 to 120°C (-58 to 248°F) Full Programmable Range
Statinless Steel (IP67)

測温抵抗体 (RTD) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

RTD 100 Ω sensor with built-in transmitter is programmable by a computer. The configuration kit required for programming is M12TX-CONFIG. This unique probe is ideal for areas with space limitations where traditional head connections are too large to fit. The M12 thread design offers a secure industrial connection.

Specifications
Body: Stainless steel AISI 316L
Probe Length: 13 mm (0.51") and 24 mm (0.94")
Diameter: Ø 3 mm (0.1")
Probe Type: Thermowell AISI 316L SS
Probe Minimum Bending Radius: Three-times the outer diameter [except the sensing tip which length is 30 mm (1.2")]
Connection: 1/8 NPT male thread
Sensor: RTD PT100 class A up to 300°C in accordance to IEC751
Range: -50 to 120°C (-58 to 248°F)
Tmax. Electronic: 80°C (176°F)
Sensor Break Monitoring:
    Selectable: Upscale (>21.0 mA) or downscale (<3.6 mA) action
    Sensor Short-Circuit: Fixed to downscale (<3.6 mA) action
Output:
    Signal: 4 to 20 mA
    Permissible Load: 700 @ 24 Vdc [RLo= (Vsupply-8,5)/0,020]
Default Factory Setting for 4 to 20mA output: 0 to 100°C
Response Time (90%): <50 ms
Isolation In-Out: Non-isolated
Power Supply: 8.5 to 32 Vdc (polarity protected)
Environment Conditions:
    Temperature: -40 to 80°C (-40 to 176°F) for plastic body
    Relative Humidity: 0 to 100%
    EMC: In accordance to EN 61326
    Degree of Protection: IP65 and IP67 in accordance to IEC60529
Accuracy:
    Transmitter: Maximum of ±0.2°C or ±0.2% of span
    Sensor: Class A in accordance to IEC751
Temperature Influence [Deviation from 20°C (68°F)]: Maximum of ±0.3°C/25°C (77°F) or ±0.3% of span/25°C (77°F)
Supply Voltage Influence: Negligible
Range Configurations: It is possible set the input temperature range (span) by the M12TX-CONFIG configuration kit (PC with OS Windows required)
Zero Adjustments: Any value between -50 to 50°C
Minimum Span: 50°C (122°F) [if the zero value is set between one of these values: -40°C (-40°F), -20°C (-4°F), 0°C (32°F), 20°C (68°F), 40°C (104°F), the minimum span is 20°C (68°F) rather than 50°C (122°F)]
Sensor Error Compensation: Over 2 points (maximum 1% of span)
Factory Setting: 0 to 100°C/sensor break >21 mA (upscale)
Response Time: Diameter 3 mm <3.5 seconds, diameter 6 mm <13 seconds (test in water to IEC751- time for reaching 63.2% of instantaneous temperature change)

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

Standard

M12TXSS-PT100-13MM-1/8NPT

¥26,406 (税込)
(税抜価格 ¥24,005)

納期: 10 週間

Temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118') diameter, 13 mm (0.51') long, 1⁄8 NPT

M12TXSS-PT100-24MM-1/8NPT

¥27,181 (税込)
(税抜価格 ¥24,710)

納期: 4 週間

temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118') diameter, 24 mm (0.94') long, 1⁄8 NPT

Metric

M12TXSS-PT100-13MM-G1/8

¥26,406 (税込)
(税抜価格 ¥24,005)

納期: 10 週間

Temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118') diameter, 13 mm (0.51') long, G1⁄8 Thread

M12TXSS-PT100-24MM-G1/8

¥27,181 (税込)
(税抜価格 ¥24,710)

納期: 2 週間

temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118') diameter, 24 mm (0.94') long, G1⁄8 Thread

Accessories

M12TX-CONFIG

¥71,654 (税込)
(税抜価格 ¥65,140)

納期: 2 週間

Configuration kit for M12TXSS, USB serial interface, connection cables, programming software for Windows®

M12CFM-P24STPC-SFSR-FL-3

お問い合せ下さい

納期:

PVC insulated and jacketed 24 AWG stranded with M12 straight socket and 3 meters length cable

M12CFM-P24STPC-SFSR-FL-20

お問い合せ下さい

納期:

PVC insulated and jacketed 24 AWG stranded with M12 straight socket and 20 meters length cable

M12TX-CONFIG-SET

¥71,654 (税込)
(税抜価格 ¥65,140)

納期: 2 週間

Accessory to configure the M12TX series devices through a PC with Windows 10 or higher and the TTX-Platform software

注: Comes complete with operator’s manual.
Ordering Example: (1) M12TX-CONFIG Configuration kit for M12TXSS, USB serial interface, connection cables, programming software for Windows®, ¥65,140 plus (1) M12TXSS-PT100-13MM-1/8NPT Temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118'') diameter, 13 mm (0.51'') long, 1⁄8 NPT, ¥24,005 plus (1) M12TX-CONFIG Configuration kit for M12TXSS, USB serial interface, connection cables, programming software for Windows®, ¥65,140 plus (1) M12TXSS-PT100-13MM-1/8NPT Temperature transmitter with M12 input connector for Pt100, output 4 to 20 mA standard, 3 mm (0.118'') diameter, 13 mm (0.51'') long, 1⁄8 NPT, ¥24,005, ¥65,140 + 24,005 + 65,140 + 24,005 = ¥178,290