Big Display, Remote Display - Discontinued

iLD-C2, iLD-EI

Big Remote Display

スクロールダウンし、全ラインアップをご覧ください

注文する

BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LEDs
BIG 7-segment LEDs, 4 or 6-Digits
Program to Change Colors: RED, AMBER, GREEN
RS-232/RS-485 Input
Ethernet Input

商品説明

Starting from Feb 1st 2018, ILD-EI & C2 Series have been discontinued. As a possible substitute, please check out the ILD-UTP & SP Series or the LDB Series for details.

The "Serial RS-232 BIG Remote Display" (iLD-C2) are 4 or 6 digit slave displays providing remote readout from instruments such as programmable controllers, digital panel meters and other instruments with serial output. Two communication interfaces are supported in Remote Display: RS-232 and RS-485 and can be programmed through front panel buttons.

The iLD-C2 can display data transmitted via serial communications from a computer, or from other devices which transmit ASCII data via RS-232 and RS-485. These BIG Displays are compatible with virtually all OMEGA™ devices that feature serial communications including: iSeries meters and controllers, DP41 digital panel meters, MICROMEGA™ controllers, iDRX DIN-RAIL mounted signal conditioners, and many more.

The "Ethernet BIG Remote Display" (iLD-EI) are 4 or 6-digit slave displays providing remote readout from instruments with an Ethernet output or display data from a computer.

The iLD-EI can display data transmitted via Ethernet from Omega instruments that have an Ethernet output option, (iSeries with -EI). You can tunnel or display the same data from a computer using telnet. Any two units with Ethernet option (iSeries with -EI or iServer) can talk to each other over the Ethernet LAN, WAN, and Internet using TCP/IP protocol. This allows the connected serial devices to an iServer to communicate with each other back and forth over TCP/IP networks.

Programmable Color Display
The iLD-C2 and iLD-EI feature BIG bright 7-segment LED's that can be programmed to change colors between RED, AMBER, and GREEN to indicate visual alarms.
In the "slave" mode, the BIG remote displays can be used for displaying alphanumerical characters from a computer using serial connection (iLD-C2) or Telnet (iLD-EI). Compatible Host device must feature serial RS-232 or RS-485 output.

The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4 (IP65) protection. Whether panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

REMOTE DISPLAYS

iLD24-EI

お問い合せ下さい

納期:

57 mm (2.25") 4-digit display with Ethernet Input

iLD44-EI

お問い合せ下さい

納期:

101 mm (4") 4-digit display with Ethernet Input

iLD26-EI

お問い合せ下さい

納期:

57 mm (2.25") 6-digit display with Ethernet Input

iLD46-EI

お問い合せ下さい

納期:

101 mm (4") 6-digit display with Ethernet Input

iLD24-C2

お問い合せ下さい

納期:

57 mm (2.25") 4-digit display, RS-232/485 input

iLD44-C2

お問い合せ下さい

納期:

101mm (4") 4-digit display, RS-232/485 input

iLD26-C2

お問い合せ下さい

納期:

57 mm (2.25") 6-digit display, RS-232/485 input

iLD46-C2

お問い合せ下さい

納期:

101 mm (4") 6-digit display, RS-232/485 input

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)		(2)
iLD		-

以下からオプションを選択:

(1) Size of Digit Display :
24 : 57 mm (2.25 inch) 4-digit display
44 : 101 mm (4 inch) 4-digit display
26 : 57 mm (2.25 inch) 6-digit display
46 : 101 mm (4 inch) 6-digit display

(2) Input Type :
EI : Ethernet Input
C2 : RS232/485 Input

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。