Two-Color I/R System. Rack Mounted Monitor

DP1541, OS1541 Superseded Product

Two Color Infrared System

スクロールダウンし、全ラインアップをご覧ください

注文する

Exceptional for Induction Heating
Measurements Independent of Emissivity
Optional Signal Processing
Optional Controller Outputs
1 mV/Degree Output Standard
Optional 0-10 Vdc, 4-20 mA Linear Second Output
Switchable 10 or 100 msec Time Constant

OS1542 Sensors
Silicon Detector
0.9 and 1.06 Micron Filters
Temperatures from 980 to 1800°C
Minimal Effect by Steam or Hot Gas

OS1543 Sensors
Lead Sulfide Detector
1.55 and 2.25 Micron Filters
Temperatures from 250 to 1500°C

商品説明

The OS1540 Series has been superseded, please see the OS4000 Series as a possible substitute or consult OMEGA's Temperature Engineering department.

The OS1542 and OS1543 fiber optic sensors are designed specifically for the DP1541 two-color emissivity-independent monitor and the associated fiber optic cable assembly. The small size of these probes makes them well suited for installations with limited mounting room. They are unaffected by RFI and EMI noise, which also make them excellent for use in hostile environments like induction or microwave heating.

The OS1542 and OS1543 fiber optic sensors operate at two wavebands and utilize an energy ratio to calculate temperature. They can, therefore, measure temperature on objects whose emissivity is unknown provided the emissivity at all temperatures is proportional at the two wavebands used for the measurement, which is typical.

The OS1542 fiber optic sensor head has a silicon detector filtered at narrow bands centered at 0.90 and 1.06 microns; it is used primarily at high temperatures and is minimally affected by steam and hot gas.

The OS1543 fiber optic sensor head has a lead sulfide detector filtered over wide bands centered at 1.55 and 2.25 microns. It is used as a general purpose head which can measure temperatures down to 250°C. It should not be used where hot steam or gas is present.

The fiber optic cable assembly differs according to certain parameters specific to the application. It allows remote mounting of the OS1542 or OS1543 detector heads away from hot or hazardous areas.



IR2 SUPERMETER® Ultra High Performance 2-Color Ratio Fiber Optic Infrared Temperature Measurement and Control System		Fast Response Infrared Fiber Optic Thermometer/Transmitter with Local Display and Analog Output
CLICK HERE !		CLICK HERE !

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

DP1541-F

お問い合せ下さい

納期:

Single channel 19" rackmount two-color monitor, slope control, 1 mV/ degree output, 3 3 /4 digit display. (For use with OS1542 or OS1543 sensors.) Analog Output 1 mV/°F

DP1541-C

お問い合せ下さい

納期:

Single channel 19" rackmount two-color monitor, slope control, 1 mV/ degree output, 3 3 /4 digit display. (For use with OS1542 or OS1543 sensors.) Analog Output for 1 mV/°C.

OS1542-L1-R1-4

お問い合せ下さい

納期:

Optical Sensor 1050-1800°C (1925-3270°F) Spot Size @ Focal Dist. 1.2" @ 36" 4ft. Cable Length.

OS1542-L1-R2-4

お問い合せ下さい

納期:

Optical Sensor 980-1650°C (1850-3000°F) Spot Size @ Focal Dist. 0.18" @ 14", 4ft. Cable Length.

OS1543-L1-R3-4

お問い合せ下さい

納期:

Optical Sensor 450-850°C (847-1562°F), Spot Size @ Focal Dist. (0.076" @ 6"), Cable Length 4 ft.

注: Each unit supplied with complete operator’s manual. Consult OMEGA for information on many other controller configurations.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)	(2)	(3)
DP1541-

以下からオプションを選択:

(1) Analog Output :
F : 1 mV/°F
C : 1 mV/°C

(2) Second Output :
オプション選択がない場合 : Standard Unit
-V : 0 to 10 Vdc
-MA : 4 to 20 mA

(3) Signal Processing Outputs :
オプション選択がない場合 : Standard Unit
-PS : Peak sense and Hold
-SA : Signal Averaging
-VS : Valley Sense and Hold
-ST : Sample Timed Hold
-FR : Fast Rise Variable Decay

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。