An additional programming tool is available the Omega Google App - Direct Link relying on RFID/NFC connectivity and allowing straightforward programming without additional wiring and programmable via Android devices.
The CN400 Single/Dual Inputs PID Controller Series stand out for the bright display which ensures optimal visibility and increased level of information for the operator. The CN400 Series introduces the latest NFC/RFID programming technology with a dedicated App - Omega Direct Link for all Android devices (Free Download from Google Play). No more wiring, cables, or power supply, just quick set-up/updates on site with your phone. With dual analog input and dual analog outputs model option, the CN400 Series can achieve two separate heating/cooling PID control loops in one device or to handle mathematical operations between two process values. The outputs can be selected as command/multiple alarm modes/analog retransmission. Serial communication standard is RS485 with Modbus RTU/Slave protocol. The CN400 Series power supply has an extended range of 24 to 230VAC / VDC with galvanic insulation of the net for the single loop version, while the model with double analog input provides two versions: 115 / 230 VAC or 24 VAC / VDC.
Inputs 1 or 2 - Configurable: 16 bit, selectable for TC type K, S, R, J, T, N, B (automatic compensation of cold junction) -25 to 85°C, ±0,2% F.S. ±1 digit F.S.), thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0 to 10 V (50000 points), 0/4 to 20mA (40000 points), 0 to 60 mV (25000 points), potentiometer 1 to 150 KΩ (50000 points) Sampling time: Programmable up to 2.1 ms (frequency up to 470 Hz) 2/4 digital inputs: Setpoint change, Hold, Run, Tuning launch, Start / Stop, Lock configuration 1 Current Transformer (C.T.) input: Selection C.T. 50 mA, 800 μs - 4096 points
Outputs 2/3 relays: Relay 2 A - 250 V AC resistive change 2 SSR: 12 / 24 V DC - 30 mA max 1/2 analog: Selection 4 to 20 mA (40000 points ± 0,2% F.S.) or 0 to 10 V DC (40000 points ± 0,2% F.S.) for command or retransmission PV / SPV Serial communication: RS485 Modbus RTU - Slave (4800 to 115200 baud code-T)
Software Features Control algorithms: ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportional Tuning: Manual or automatic Data protection: Lock of control / alarm setpoint / Access to parameters by password Alarm modes: Absolute / Threshold, Band, High / Low deviation. Alarm with optional Manual reset. Loop Break Alarm Auto / Manual function: Output percentage command also with automatic change in case of sensor failure Double P.I.D: Heating / Cooling P.I.D Programmer function: Pre-programmed cycle / 3 steps Soft-Start: Rising gradient expressed as Degrees / Hour or fixed output percentage Open / Close logic: Open / Close logic for motorized valves
Box: 48 x 48 (front panel) x 105 mm Power supply: 24 to 230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2.5KV Consumption: 8 W Display: 4 digits 0.5” white + 4 digits 0.3” red Operating conditions: Temperature 0 to 45 °C, humidity 35 to 95 RH% MaterialBox: PC UL94V2 self-extinguishing, front panel: PC UL94V2 Weight: Approx. 185 g Sealing: IP65 (front panel) IP20 (box and terminal blocks) Quick set-up options: Memory Card, software LABSOFTVIEW, or EASY-UP APP: NFC Programming via APP Direct Link for Android smartphones
We noticed you are from the US. Visit your local site for regional offers and live support.