カート  |  お問い合わせ  | 
フリーダイヤル 0120-040-572
海外からのお問合せ+81-3-5244-4675

Wall-Mount Programmable Temperature Controller

CN1511 Series

Wall Mount Temperature Controller | CN1511 Series

Wall Mount Temperature Controller

スクロールダウンし、全ラインアップをご覧ください

2 year warranty
  • Large, 7-Digit, 7-Segment LED Display 20 mm (0.8") H
  • Multiple Control Modes —On/Off, PID, Heat/Cool
  • 10-Segment Ramp/Soak Program
  • 5 Independent Ramp and Soak Programs
  • Programmable Control Parameters
  • Thermocouple, RTD, and Thermistor Temperature Inputs
  • Current, Voltage, and Millivolt Process Inputs
  • Scaling for Voltage, Current, and Millivolt Signals
  • 4 Programmable Process Alarms (Optional)
  • Relay or Solid State Outputs (Optional)
  • Built-In Buzzer to Sound Alarm (Optional)
  • 2 Programmable Timers (Optional)
  • Easy to View from a Distance
  • Protection from Dust and Moisture
温度調節器 (PIDコントローラ) - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

Housed in a wall-mount, watertight plastic enclosure, the CN1511 is a flexible temperature controller that offers the ease of an on/off controller with the precision of a full-blown PID controller. For applications that do not require the complexity of PID control, this device can be programmed to work as simple on/off controller. Yet for processes that require close temperature conformity, the CN1511 can be run under full PID control, selectable for either heating (direct acting) or cooling (reverse acting).

The CN1511 accepts 5 different ramp and soak programs, each with up to 10 segments. Separate pass-codes are required for selecting or entering a ramp/soak program. This prevents operators from making any inadvertent changes. The manual hold feature allows for an indefinite hold anywhere along the ramp/soak profile. Also offered is a manual setpoint entry mode for a quick ramp-to-setpoint function. This eliminates the need to enter a complete ramp/soak program.

Maximum and minimum temperature readings are continuously tracked, and 4 optional process alarms are available. These are programmable over the entire range of the selected input type. They can be configured as latching or non-latching, normally open, or normally closed. There are also 2 optional timers that work independently or in conjunction with process limits (e.g., turning on a fan 10 minutes after limit 1 temperature is reached). The time function keeps track of process run time.

The CN1511 also functions as a rate monitor, indicating instantaneous as well as average rate of temperature change. A programmable time base allows the rate to be displayed in per second, minute, hour, or any other interval. The CN1511 can also be programmed for a rate alarm, which can indicate whether a predetermined rate is exceeded or not achieved.

Additional features include a built-in buzzer that sounds whenever a limit is reached (available with the relay option). Visual indication of relay output status is given by LEDs on the front panel. The CN1511 also has a power line filter, designed to provide trouble-free operation in harsh industrial environments.


SPECIFICATIONS
Input Type:
. J, K, T, E, R, S, B, thermistor
2252 . @ 25°C (77°F), Pt100 RTD
. 0 to 10 Vdc
. 4 to 20 mA loop current
. 0 to 100 mV
CJC Error: ±0.5°C @10 to 45°C
(±0.9°F @ 50 to 113°F)
Accuracy:
Resolution: 1°C/°F for T/Cs and
RTDs; 0.1°C/0.2°F for thermistors
Process: 9999, 999.9, 99.99, 9.999
Voltage: 0.05% FS
Current: 0.05% FS
A/D Conversion:
20,000 count A/D converter
Conversion Rate: 7/s (typical)
Display:
Red 7-segment LED display,
20 mm (0.8") H
Display Test: 8.8.8.8.8.8.8. on power-up
Power Options:
120 Vac (60 Hz)—standard
220 Vac (50 Hz)—optional
15 Vdc @ 900 mA—optional
Scale:Programmable from 1 to 30000
Offset:
0.00 to 20.00 (current input),
0.000 to 10.000 (voltage input),
0.00 to 100.00 (millivolt input)
Rate: 0 to 500 seconds
Prop. Band: 0 to 100% of span
Reset: 0 to 50 repeats/min
On/Off Deadband (Programmable):
0 to full scale
Control Output: 5 Vdc drive @ 50 mA
max (internal 5 Vdc source)
Output (Optional):
1. Open collector—6 open-collector
outputs, maximum sink capability
50 mA per output (internal source)
2. Relays—SPST; 1 A @ 28 Vdc
or 0.5 A @ 120 Vac resistive
Output Termination:
Euro-style pluggable connector
Rate: Variable, displayed as rate
change/time base
Enclosure Dimensions:
Case: 192 W x 160 H x 103 mm
(7.55 x 6.29 x 4.05")
Material:
Polystyrene with crystal-clear
polycarbonate lid
Ingress Protection:
Up to IP65 (DIN standard)
Weight:1.4 kg (3 lb)
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.
注文数
商品説明
Quick Ship
  
CN1511RTD-2
¥47,795
納期: 6 週間
 
Wall-mount temperature controller, RTD input, 8-15 Vdc
Quick Ship
  
CN1511TH
¥44,770
納期: 6 週間
 
Wall-mount temperature controller, thermistor input
Quick Ship
Click to expand/minimize a list of what others bought with theCN1511TC
CN1511TC
¥44,770
納期: 2 週間
 
Wall-mount temperature controller, thermocouple input
Quick Ship
  
CN1511TC-2
¥47,795
納期: 6 週間
 
Wall-mount temperature controller, 8-15 Vdc
Quick Ship
  
CN1511TC-4
¥57,475
納期: 6 週間
 
Wall-mount temperature controller, thermocouple input, 6 open collector outputs
Quick Ship
  
CN1511TC-3
¥57,475
納期: 6 週間
 
Wall-mount temperature controller, thermocouple input, 6 relay outputs
このサイトの金額はすべて日本円(税抜)で表示しています
注: Comes with watertight connectors (2) and complete operator’s manual.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください
以下からオプションを選択:


(1) Input Code :
TC : J K T E Thermocouple input
RTD : Pt100 Ohm input
TH : Thermistor input
R : R Thermocuple input
S : S Thermocuple input
B : B Thermocuple input
P : 0 to 100 mV input
V : 0 to 10 Vdc inout
C : 4 to 20 mA

(2) Power Options :
オプション選択がない場合 : Std 120 Vac
-1 : 240 Vac
-2 : 8 to 15 Vdc

(3) Output Options :
オプション選択がない場合 : Std 5 Vdc drive @ 50 mA max
-3 : 6 relay outputs - 4 alarms 2 timers
-4 : 6 open-collector outputs 4 alarms - 2 timers
注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは esales@jp.omega.com)へお問合せください。