お問合せ
カート  |  お問い合わせ  | 
0120-769-103  | 
フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

1/16, 1/8, 1/4 DIN & 68mm Cutout Economical Temperature/Process Autotune Controllers.
Models: CN144, CN146, CN147, CN148
Discontinued Product

CN140 Family

1/16, 1/8, 1/4 DIN & 68mm Cutout Economical Temperature/Process Autotune Controllers | CN140 Family

スクロールダウンし、全ラインアップをご覧ください

注文する
1 year warranty CE
  • Low Cost Choice
  • Dual display - Process and Setpoint
  • CSA Listed

    INPUTS
  • Accepts 10 Types of Thermocouple, 2 RTD Types, 7 Voltage and Current Input Ranges
  • Isolation of Inputs and Outputs

    OUTPUTS
  • Relay, dc Pulse, Voltage or Current Output
  • Absolute or Deviation Alarms
  • Heater Break Alarm

    CONTROL OPTIONS
  • Heater Break Alarm
  • Autotune PID or On/Off Control
  • Provides Set Value Bias (Alternative Idle Setpoint Initiated by Contact Closure)

商品説明

The CN140 Series is no longer available. Please see the CN8260 Series or the CN8240 Series as potential substitutes, or contact our sales/engineering department.

The CN140 family of controllers feature an advanced autotuning PID equation which automatically selects the optimum PID values, as well as offering the user the alternative of manually selecting the PID parameters. Units are available with either a mechanical relay, SSR driver, current or voltage outputs. When relay or SSR driver output models are specified, the user can configure the controller for on-off control. The optional alarm packages offer alarm points that can be set to any value within the input range. These setpoints can be selected by the user as either absolute or deviation alarms. To restrict unauthorized changes of control parameters, a four-level keylock feature is included.
The CN140 Controller series is an economical, general purpose temperature/process controller featuring dual displays (process variable and setpoint), for applications where optimal control performance is required. The ability to accommodate ten thermocouple types, two RTD types (Pt100) and seven current and voltage ranges in a single unit adds to the versatility of these instruments.

Examples of economical pricing for popular models are referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

For Special Options Consult Sales or Temperature Engineering for Availability and Pricing.
注文する （部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
CN144MA-DC
お問い合せ下さい   
納期: 
 
 
1/4 DIN controller, programmable mA input and dc pulse output
CN144MA-DC-SVB
お問い合せ下さい   
納期: 
 
 
1/4 DIN controller, programmable mA input, dc pulse output and set value bias
CN146TRMV-DC-ALHB1
お問い合せ下さい   
納期: 
 
 
1/16 DIN controller, programmable input for either thermocouple, RTD or millivolts, dc pulse output, hi alarm and 30 A heater break alarm
CN146MA-DC
お問い合せ下さい   
納期: 
 
 
1/16 DIN controller, programmable mA input and dc pulse output
CN146V-R-SVB
お問い合せ下さい   
納期: 
 
 
1/16 DIN controller, programmable voltage input, mechanical relay output and set value bias
CN147MA-R-AL1
お問い合せ下さい   
納期: 
 
 
68 mm (2.7 inch) square cutout controller, programmable mA input, mechanical relay output and hi/lo alarms
CN147TRMV-DC-ALHB1
お問い合せ下さい   
納期: 
 
 
68 mm (2.7 inch) square cutout controller, programmable input for either thermocouple, RTD or millivolts, dc pulse output and hi alarm and 30 A heater break alarm
CN148V-R-SVB
お問い合せ下さい   
納期: 
 
 
1/8 DIN vertical controller, programmable voltage input, mechanical relay output and set value bias
CN148TRMV-R-ALHB2
お問い合せ下さい   
納期: 
 
 
1/8 DIN vertical controller, programmable input for either thermocouple, RTD or millivolts input, mechanical relay output and hi alarm and 50 A heater break alarm
注: * Heater break alarms not available with F or V output types. On CN146: heater break alarm and set value bias options cannot both be ordered.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください
以下からオプションを選択:


(1) PID Controllers :
CN144 : 1/4 DIN controller
CN146 : 1/16 DIN controller
CN147 : 68 mm (2.7 inch) square controller
CN148 : 1/8 DIN vertical controller

(2) Input Types :
MA : Programmable mA input
V : Programmable voltage input
TRMV : Programmable input for either thermocouple/RTD or millivolts

(3) Output Options :
DC : dc pulse
F : 4 to 20 mA
R : Mechanical relay
V : 0 to 10 Vdc

(4) Options :
オプション選択がない場合 : Standard Unit
-AL1 : Hi/Lo alarms
-ALHB1 : *Hi alarm with heater break 30 A
-ALHB2 : *Hi alarm with heater break 50 A
-SVB : Set value bias
注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。
We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >