Dual RS-232/Multimode ParallelPlug-in Adaptor for IBM or Compatible Computer
Discontinued !

MMP-100

スクロールダウンし、全ラインアップをご覧ください

注文する

Multimode Parallel Port with Bidirectional, EPP, and ECP Capability
Two RS-232 Serial Ports with 16550 Compatible UARTs
All Ports are Address Selectable
Individually Selectable Interrupts (IR 2-5, IRQ7, IRQ 10-12, and IRQ 15)
Interface to EPP or ECP Devices Such as Tape Drives, CD-ROM Drives and Hard Drives
Connect to Modems, Printers, Mouse, Scanners, Plotters, RS-232 Networks, etc.

商品説明

This Series has been discontinued. Please review the OMG-COMM232-EX as a potential substitute, or contact our Data Acquisition Engineering Department.

The MMP-100 is a plug-in adaptor card for IBM or compatible personal computers using the ISA expansion bus. It occupies two expansion slots and provides one multimode parallel port and two asynchronous RS-232 serial ports. The multimode parallel port is accessed through a D-25 connector, and the two RS-232 serial ports are accessed through a D-25 connector and a D-9 connector. The multimode parallel port may be operated in one of four different modes: standard PC compatible parallel port mode, PS/2 type bidirectional port mode, Enhanced Parallel Port (EPP) mode, or Extended Capabilities Port (ECP) mode. EPP operation as described in the IEEE 1284 specification is fully supported. In addition, ECP operation as defined in the Microsoft Extended Capabilities Port specification is supported as well. The parallel port mode is jumper selectable, and the port may be implemented at one of three standard parallel port I/O addresses (278h, 378h or 3BCh). The multimode parallel port may use one of nine possible IRQ levels (IRQ 2-5, 7, 10-12, and 15). The two asynchronous RS-232 serial ports are implemented with 16550 compatible UARTs which will allow the serial ports to be operated in multitasking environments and with applications involving high data transfer rates. The two serial ports may be implemented at the standard COM port addresses (3F8h, 2F8h, 3E8H, and 2E8h). Each serial port is provided with access to IRQ 2-5, 7, 10-12, and 15.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

MMP-100

お問い合せ下さい

納期:

Dual RS-232/Multimode Parallel Plug-in Adaptor for IBM or Compatible Computers

注: The MMP-100 comes with Windows 95 driver software and operator's manual. Windows 3.1 software is available on special request. Consult engineering for availability of Windows NT drivers.

Dual RS-232/Multimode ParallelPlug-in Adaptor for IBM or Compatible Computer Discontinued !

MMP-100

Dual RS-232/Multimode ParallelPlug-in Adaptor for IBM or Compatible Computer
Discontinued !