フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

24 Digital I/O PCMCIA Card
Discontinued Product

IOP-241

24 Digital I/O PCMCIA Card
Discontinued Product | IOP-241

24 Digital I/O PCMCIA Card Discontinued Product

スクロールダウンし、全ラインアップをご覧ください

1 year warranty
  • PCMCIA PC Card Standard Specification 2.1 Compliant
  • Client Software Driver (PCMCIA Card Services Specification 2.1 Compatible)
  • “Hot-Swapping” Supported (Insertion and Removal of IOP-241 While System is Powered Up)
  • 24 Buffered I/O Signals, Each May Be Configured As Input or Output
  • Eight Digital Signals Available as Interrupt Sources (Level Sensitive or Edge Triggered)
  • Selectable Base Address and Selectable and Sharable Interrupt

商品説明

The IOP-241 is no longer available. Please see the OMG-USB-DIO as a possible alternative or contact our Data Acquisition Department.

The IOP-241 is a PCMCIA card which allows parallel communication between personal computers with PCMCIA sockets and external devices. The IOP-241 is PCMCIA PC Card Standard Specification 2.1 compliant and plugs into Type II (5 mm) PCMCIA sockets. The IOP-241 provides up to 24 digital input and output signals. Each signal may be individually configured as input or output. In addition, each of the 24 signals are buffered to enhance the IOP-241’s drive capability. Eight of the digital signals may be used as interrupt sources. Each interrupt source may be programmed to be level sensitive or pulse triggered. An additional interrupt is available when all 24 I/O lines are needed. The interrupt signal of the IOP-241 may be mapped to any one of IRQ3-7, 9-12 or 14 and 15. The IOP-241 occupies 16 I/O address locations, and the address location may be selected by the user. All necessary software is included to install and configure the IOP-241 for use with DOS/Windows 3.x, and Windows 95/98. The IOP-241 is also shipped with DAQDRIVE, a software driver that allows programmers to create their own applications from most common DOS and Windows programming languages. For turn-key operation, the IOP-241 is also compatible with Labtech Notebook and Snap Master Software.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
IOP-241
お問い合せ下さい   
納期: 
 
 
24 Channel digital I/O PCMCIA card
UIO-37
お問い合せ下さい   
納期: 
 
 
Terminal strip, Requires CP-IO37 cable
注: Comes with complete operator’s manual, DAQDRIVE and PCMCIA configuration software on CD ROM.

製品マニュアル:

ダウンロード Daqdrive software manual
ダウンロード Daqdrive Supplemental manual
ダウンロード IOP-241 operator's manual
We noticed you are from the US. Visit your local site for regional offers and live support.