フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

DIN Rail Mount AC Voltage/Current Signal Conditioners, 4-Wire AC Powered Design

DRA-ACT-4 Series

DIN Rail Mount AC Voltage/Current Signal Conditioners, 4-Wire AC Powered Design | DRA-ACT-4 Series

スクロールダウンし、全ラインアップをご覧ください

1 year warranty
  • DRA-ACT-4I Series AC Current Input
  • DRA-ACT-4V Series AC Voltage Input
  • ± 0.1% Accuracy
  • Isolated
  • 4-20 mA Output
  • Low Profile Enclosure
信号変換器 / トランスミッタ - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

The DRA-ACT-4I AND DRA-ACT-4V Series are isolated 4-wire ac current and ac voltage input DIN rail mount signal conditioners that convert the measured input into a proportional, linear and highly accurate 4-20 mA output current. The DRA-ACT-4I Series of ac current input models includes models for 0-1 Aac and 0-5 Aac inputs with a 4-20 mA output. The DRA-ACT-4V Series of ac voltage input models includes models for 0-150 Vac, 0-250 Vac and 0-400 Vac inputs again with a 4-20 mA output. Standard instrument power is 115 Vac, 50/60 Hz. Units can also be configured for optional 230 Vac, 50/60 Hz power. For complete safety, an internal transformer isolates the signal conditioner input from the output thus enabling these units to withstand large momentary inputs. Complete input to output isolation, high surge current capacity and high output signal-to-noise ratio make these signal conditioners highly immune to ground loop signals and RFI. Zero and span trimmers accessible from the front panel of these units facilitate fine tuning.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
DRA-ACT-4I-1
お問い合せ下さい   
納期: 
 
 
0 to 1 A ac input, 4 to 20 mA output
DRA-ACT-4I-2
お問い合せ下さい   
納期: 
 
 
0 to 5 A ac input, 4 to 20 mA output
DRA-ACT-4V-1
¥62,304 (税込)
(税抜価格 ¥56,640)
納期: 6 週間
 
0 to 150 Vac input, 4 to 20 mA output
DRA-ACT-4V-2
お問い合せ下さい   
納期: 
 
 
0 to 250 Vac input, 4 to 20 mA output
DRA-ACT-4V-3
¥62,304 (税込)
(税抜価格 ¥56,640)
納期: 2 週間
 
0 to 400 Vac input, 4 to 20 mA output
注: * Standard power is 115 Vac, 50/60 Hz. To order unit configured for 230 Vac, 50/60 Hz power, add suffix “-230” to model no., no additional charge. Comes with complete operators manual.
We noticed you are from the US. Visit your local site for regional offers and live support.