DI-730 Has 8 Isolated
Inputs (10 mV to
800 Volt Range)
Standard Printer Port,
Optional USB or
Ethernet Interface
16-Bit Resolution
(DI-720)
商品説明
The DI-720 and DI-730 are no longer available. Please see the OMB-DAQ55/56
series as a possible alternative or contact our Data Acquisition Department.
The DI-720 Series and DI-730
Series are families of instruments
that offer high resolution, 250 kHz
waveform recording capability. They
communicate through your PC's
parallel port in EPP, bi-directional,
or standard mode. Other optional
communications interfaces include
USB and Ethernet. Use the DI-720
for general purpose applications
where preamplified signals are
acquired. Use the DI-730 for wide
dynamic range measurements,
especially those involving ac or dc
electric motors. Examples include
paper, aluminum, and steel mills,
high speed trains, and rail and
seagoing locomotion.
The 8-channel DI-730 Series
features a measurement range of
±10 mV to ±800 Vdc (or peak ac)
over six ranges with ±1000 V
channel-to-channel and input-to-output
isolation. Replace entire
racks of isolation amps, high and
low voltage amps, and data
acquisition subsystems with one
portable, lightweight instrument.
The DI-720 Series accepts 32
high-level or signal conditioned
analog inputs in a single-ended
mode or 16 inputs in a differential
input mode. The high-level inputs
are typically low impedance, pre-conditioned
signals in the range
of 1.25 to 10 V. Channel expansion
up to 240 channels is possible
with expanders.
We noticed you are from the US. Visit your local site for regional offers and live support.
