16 Bit A/D and 12 Bit D/A PCMCIA Data Acquisition Adaptor
Discontinued Product

DAQP-308

スクロールダウンし、全ラインアップをご覧ください

注文する

16-Bit Resolution for Analog Input
Two 12-Bit Analog Output Channels
8 Single Ended or 4 Differential A/D Channels, Expandable to 128 Channels
Four Digital I/O Channels
16-Bit Timer/Counter with Auto-Reload and Readout Latch
0.006 Hz to 100 kHz Sampling Rate
Bipolar Input Range of 610 Volts, with Programmable Gain of 1, 2, 4 and 8
2 K Data FIFO
Programmable Scan FIFO with 2048 Entries
DAQDRIVE and DaqEZ Software Included

商品説明

The DAQP-308 is no longer available. Please see the INET-100 as a possible alternative or contact our Data Acquisition department.

The DAQP-308 is a Type II PCMCIA data acquisition adaptor with 4 differential or 8 single-ended 16- bit A/D input channels (expandable to 128), with a maximum sampling rate of 100 kHz, and programmable gains of 1, 2, 4, or 8. Its bipolar analog input range extends from ±1.25 V, ±2.5 V, ±5 V, to ±10 V. The DAQP-308 is also equipped with two 12-bit D/A output channels. The outputs can be updated individually when writing to the corresponding D/A port, or simultaneously when a synchronization signal comes. The DAQP-308 has a 2 K data FIFO which will significantly reduce CPU overhead and a scan FIFO of 2048 entries, each of which can be specified for an input channel and its associated gain. It has a selectable scan speed of 10 ms to 40 ms per channel. Data acquisition may be initiated by a trigger signal or by using the DAQP-308’s pre-trigger capability. The DAQP-308 has a 24-bit auto-reload pacer clock which generates accurate sampling rates from 0.006 Hz to 100 kHz using an internal or external clock source. The pacer clock is actually a 24-bit auto-reload frequency divider. It contains a 24-bit divisor register, a 24-bit counter, and internal clock pre-scaler and a clock source multiplexer. The DAPQ-308 also has a 16-bit counter/timer with an auto-reload and readout latch which provides independent timing for the D/A channels, and operates with internal or external clock source and gate controls. The DAQP-308 includes OMEGA’s DAQDRIVE software driver and DaqEZ user friendly data acquisition application software package. All necessary software is included to install and configure the DAQP-308 for use with DOS/ Windows 3.x and Windows 95. Signal Conditioning/Expansion The DAQP-208 is compatible with the SignalPro line of signal conditioners. These signal conditioners allow the DAQP-308 to read most process sensors and provides channel expansion up to 256 inputs. See the H section of the handbook for detailed information on the SignalPro line. Software OS Support: DOS, Windows 3.x, Windows 95 DAQDRIVE software drivers support numerous programming languages, including Microsoft C/C++, Borland C/C++, QuickBasic, Turbo Pascal, DasyLab support and Visual Basic 5.0 (32-bit version). As part of the DAQDRIVE package, drivers are also included for numerous third-party software packages including Labtech Notebook, LabVIEW, and SnapMaster. Dynamic Link Libraries are provided as a universal programming interface for development languages targeted for Microsoft Windows. For implementing a fully integrated data acquisition system, OMEGA’s DaqEZ user friendly application software package is included FREE, and will in many cases be all that is needed.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

DAQP-308

お問い合せ下さい

納期:

16-bit Data Acquisition PCMCIA Card

UIO-37

お問い合せ下さい

納期:

Terminal strip

注: Comes with complete operator’s manual, cable, DaqEZ and driver software on CD ROM.

製品マニュアル:

ダウンロード Daqdrive software manual

ダウンロード Daqdrive Supplemental manual

ソフトウェア:

ダウンロード Daqsuite Software (includes drivers for DOS, Windows 3.1 and Windows 95 and DAQEZ application)

ダウンロード DAQP PCMCIA Configuration Software

16 Bit A/D and 12 Bit D/A PCMCIA Data Acquisition Adaptor Discontinued Product

DAQP-308

16 Bit A/D and 12 Bit D/A PCMCIA Data Acquisition Adaptor
Discontinued Product