フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals

TX20B

Radio Telemetry System for Strain Gages, Thermocouples and Voltage Signals | TX20B

スクロールダウンし、全ラインアップをご覧ください

1 year warranty CE
  • Eliminates Cumbersome Slip Ring Installation
  • Does Not Require FCC License
  • Small Size, Light Weight
  • Wireless Sensor Interface
  • Battery Powered or Induction Powered Models Available
圧力変換器 (アクセサリ) - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

OMEGA's TX20B radio telemetry system is ideal for transmitting signals from sensors which are mounted on rotating shafts. The TX20B series miniature transmitters modulate sensor signals from thermocouples, voltage transducers, or strain gage bridge circuits onto a RF carrier and transmit them to a stationary receiver. The RX20B receiver demodulates the signal and converts it into a ±2 volt analog output. Two analog outputs signals are available simultaneously. A wide band output provides frequency response from dc to 1250 Hz. For maximum stability of the signal a filtered output is also available with a 0-10 Hz band width.
TX20B transmitters incorporate a crystal oscillator which is tuned to a specific frequency eliminating the need for tuning by the operator. Transmitter frequencies can be staggered allowing multiple transmitters to be operated in close proximity with no interference. Multi-channel receivers are available.
Transmitters are small enough in size to be taped or strapped to the rotating shaft and can be powered by a 9 V battery. For applications where continuous uninterrupted monitoring is necessary an inductively coupled power supply and transmitter are also available.
The TX20B operates in a band which does not require an FCC license.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
TX20B-S1
お問い合せ下さい   
納期: 
 
 
0.3 mV/V Strain gage transmitter
TX20B-S2
お問い合せ下さい   
納期: 
 
 
1.0 mV/V Strain gage transmitter
TX20B-S3
お問い合せ下さい   
納期: 
 
 
2.0 mV/V Strain gage transmitter
TX20B-S4
お問い合せ下さい   
納期: 
 
 
3.0 mV/V Strain gage transmitter
TX20B-E1
お問い合せ下さい   
納期: 
 
 
0.1V Voltage transmitter
TX20B-E2
お問い合せ下さい   
納期: 
 
 
1.0V Voltage transmitter
TX20B-E3
お問い合せ下さい   
納期: 
 
 
5.0V Voltage transmitter
TX20B-E4
お問い合せ下さい   
納期: 
 
 
10.0V Voltage transmitter
TX20B-J1
お問い合せ下さい   
納期: 
 
 
-17 to 93°C (0 to 200°F) Type J T/C transmitter
TX20B-J2
お問い合せ下さい   
納期: 
 
 
-17 to 204°C (0 to 400°F) Type J T/C transmitter
TX20B-J3
お問い合せ下さい   
納期: 
 
 
-17 to 427°C (0 to 800°F) Type J T/C transmitter
TX20B-J4
お問い合せ下さい   
納期: 
 
 
-17 to 538°C (0 to 1000°F) Type J T/C transmitter
TX20B-K1
お問い合せ下さい   
納期: 
 
 
-17 to 260°C (0 to 500°F) Type K T/C transmitter
TX20B-K2
お問い合せ下さい   
納期: 
 
 
-17 to 538°C (0 to 1000°F) Type K T/C transmitter
TX20B-K3
お問い合せ下さい   
納期: 
 
 
-17 to 816°C (0 to 1500°F) Type K T/C transmitter
TX20B-K4
お問い合せ下さい   
納期: 
 
 
-17 to 1093°C (0 to 2000°F) Type K T/C transmitter
Accessories (Clamp assemblies)
TX-ICA-100
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 25.4 (1) shafts, inductive
TX-ICA-125
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 31.8 (11.4) shafts, inductive
TX-ICA-150
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 38.1 (11.2) shafts, inductive
TX-ICA-175
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 44.5 (13.4) shafts, inductive
TX-ICA-200
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 50.8 (2) shafts, inductive
TX-ICA-250
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 63.5 (21.2) shafts, inductive
TX-ICA-300
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 76.2 (3) shafts, inductive
TX-ICA-400
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 101.6 (4) shafts, inductive
TX-ICA-500
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 127.0 (5) shafts, inductive
TX-ICA-600
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 152.4 (6) shafts, inductive
TX-BCA-100
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 25.4 (1) shafts, Battery Power
TX-BCA-125
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 31.8 (11.4) shafts, Battery Power
TX-BCA-150
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 38.1 (11.2) shafts, Battery Power
TX-BCA-175
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 44.5 (13.4) shafts, Battery Power
TX-BCA-200
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 50.8 (2) shafts, Battery Power
TX-BCA-250
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 63.5 (21.2) shafts, Battery Power
TX-BCA-300
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 76.2 (3) shafts, Battery Power
TX-BCA-400
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 101.6 (4) shafts, Battery Power
TX-BCA-500
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 127.0 (5) shafts, Battery Power
TX-BCA-600
お問い合せ下さい   
納期: 
 
 
Clamp assembly for 152.4 (6) shafts, Battery Power
{divder}
お問い合せ下さい   
納期: 
 
 
Receivers
RX20B-M
お問い合せ下さい   
納期: 
 
 
Receiver for battery-powered systems
RX20B-I-M
お問い合せ下さい   
納期: 
 
 
Receiver for induction-powered systems
SL20
お問い合せ下さい   
納期: 
 
 
Stationary loop for induction-powered systems
RX24B-BP
お問い合せ下さい   
納期: 
 
 
4-channel plug-in receiver backplane
RX28B-BP
お問い合せ下さい   
納期: 
 
 
8-channel plug-in receiver backplane
RX22
お問い合せ下さい   
納期: 
 
 
Plug-in receiver module (battery transmitter)
RX22-I
お問い合せ下さい   
納期: 
 
 
Plug-in receiver module (induction transmitter)

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください
以下からオプションを選択:


(1) Input Types and Ranges :
S1 : Strain gage transmitter with 0.3 mV/V input range
S2 : Strain gage transmitter with 1.0 mV/V input range
S3 : Strain gage transmitter with 2.0 mV/V input range
S4 : Strain gage transmitter with 3.0 mV/V input range
E1 : Voltage transmitter with 0.1 V input range
E2 : Voltage transmitter with 1.0 V input range
E3 : Voltage transmitter with 5.0 V input range
E4 : Voltage transmitter with 10.0 V input range
J1 : Type J T/C transmitter with 0-200 °F input range
J2 : Type J T/C transmitter with 0-400 °F input range
J3 : Type J T/C transmitter with 0-800 °F input range
J4 : Type J T/C transmitter with 0-1000 °F input range
K1 : Type K T/C transmitter with 0-500 °F input range
K2 : Type K T/C transmitter with 0-1000 °F input range
K3 : Type K T/C transmitter with 0-1500 °F input range
K4 : Type K T/C transmitter with 0-2000 °F input range
注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。
We noticed you are from the US. Visit your local site for regional offers and live support.