フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

High Accuracy Wet/Wet Differential Pressure Transducer, Low Bi-directional or Unidirectional Ranges - Discontinued

PX938 Discontinued

 | PX938 Discontinued

スクロールダウンし、全ラインアップをご覧ください

CE
  • Accuracy ± 0.1% FS
  • Unidirectional or Bidirectional Ranges
  • Line Pressure from Vacuum to 3000 psid
  • Wet/Wet Differential Pressure Measurement
  • Suitable for Media Compatible with 316L SS, Inconel X750 & Inconel 600
  • Voltage or Current Output Models

商品説明

Please note: The PX938 is being phased out and may not be available in the future. Please see the PX656 or PX771A as possible substitutes or contact our Pressure department.


The PX938 is a rugged, high accuracy, wet/wet differential pressure transducer designed for differential or relative pressure measurement of liquids or gases. Its water resistant case and rugged design make it suitable for harsh industrial environments. Models are available in ranges from 0.04 inches of water to 300 psid.

SPECIFICATIONS
Excitation: 10 to 30 Vdc for 4 to 20 mA 16 to 30 Vdc for 0 to 10 Vdc ±8 to ±15 Vdc for ±5 Vdc (bidirectional)
Output: 4 to 20 mA 2-wire or 0 to 10 Vdc 3-wire (unidirectional ranges); 12 ±8 mA (bidirectional ranges) ±5 Vdc 4-wire (bidirectional ranges)
Accuracy: ±0.1% FS BFSL
Operating Temp Range: -20 to 121°C (-4 to 250°F)
Compensated Temp Range: -20 to 82°C (-4 to 180°F)
Thermal Zero Effect: 0.005% FS/°F
Thermal Sensitivity Effect: 0.005% rdg/°F
Static Pressure: Vacuum to 3000 psig for all ranges
Static Pressure Effect:
Zero: <0.6% FS/750 psi
Span: <0.35% rdg/750 psi
Dead Volume: ≤7 ±0.1 cm3 all ranges
Response Time: 10 ms
Vibration: 50 g up to 2 kHz
Body Material: 316L stainless steel
Wetted Parts: Inconel X750, Inconel 600 and 316L stainless steel
Environmental Sealing: NEMA 4 (IP65)
Pressure Connection: G 1/8 female, supplied with brass adaptor to 1/8 NPT female
Electrical Connection: PG7 cable gland with screw terminal block accessible under cover
Weight: 1.6 kg (3.4 lb) for ≥ 8 inH2O; 1.9 kg (4.2 lb) for <8 inH2O
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
PX938-0.08WD10V
お問い合せ下さい   
納期: 
 
 
0-0.08 inch of water differential pressure transducer with a 0 to 10 Vdc output
PX938-0.08WDI
お問い合せ下さい   
納期: 
 
 
0-0.08 inch of water differential pressure transducer with a 4 to 20 mA output
PX938-0.4WD10V
お問い合せ下さい   
納期: 
 
 
0-0.4 inch of water differential pressure transducer with a 0 to 10 Vdc output
PX938-0.4WBDI
お問い合せ下さい   
納期: 
 
 
±0.4 inch of water differential pressure transducer with a 4 to 20 mA output
PX938-02WBDI
お問い合せ下さい   
納期: 
 
 
±2 inch of water differential pressure transducer with a 4 to 20 mA output
注: All PX838's have 1/8" BSP female pressure ports and come with adapters to 1/8 NPT female.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください
以下からオプションを選択:


(1) Range (W measured in in-H2O otherwise in psi) :
0.04WD : 0-0.04
0.08WD : 0-0.08
0.2WD : 0-0.2
0.4WD : 0-0.4
0.8WD : 0-0.8
02WD : 0-2
04WD : 0-4
08WD : 0-8
20WD : 0-20
40WD : 0-40
80WD : 0-80
0.02WBD : ±0.02
0.04WBD : ±0.04
0.1WBD : ±0.1
0.2WBD : ±0.2
0.4WBD : ±0.4
01WBD : ±1.0
02WBD : ±2.0
04WBD : ±4.0
10WBD : ±10
20WBD : ±20
40WBD : ±40
7.5D : 0-7.5
15D : 0-15
30D : 0-30
75D : 0-75
150D : 0-150
300D : 0-300
3.75BD : ±3.75
7.5BD : ±7.5
15BD : ±15
37.5BD : ±37.5
75BD : ±75
150BD : ±150

(2) Output :
I : 4-20 mA
10V : Voltage Output for unidirectional range
5V : Voltage Output for bidirectional range
注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。
We noticed you are from the US. Visit your local site for regional offers and live support.