OMDC-253G-200E used for speed control in Omega's wire processing.
The OMDC-250 Series variable speed DC control offers
superb flexibility, reliability, and value. A general purpose,
economical control that is rated and tested to 2 horsepower,
it provides the ultimate in standard features and versatility.
Adjustable IR compensation
Line voltage compensation
5 kΩ speed potentiometer
150% overload capacity
Transient voltage protection
Inhibit circuit permits start and stop without breaking AC lines
Shunt field supply provided
Temperature: -10 to 45°C (14 to 113°F) AC Input Voltage: ±10% rated line voltage Input Frequency: 50/60 Hz Dimensions: 97 W x 140 H x 89 mm D (3.8 x 5.5 x 3.5") Weight: 284 g (10 oz)
When using the -29 option (FWD-OFF-REV switch), care must be
taken to stop the motor completely before switching direction.
Damage to the drive can result from switching direction at speed.
注: Comes complete with operator’s manual. Ordering Example:
(1) OMDC-253G-200E-4X-7 Dual voltage variable speed DC controller with 4-20 mA isolated signal follower in a NEMA 4X enclosure, ¥136,835