Convenient Side Mounting In Small Tanks (Inside or Outside)
Very Compact Size
Selectable Normally Open or Normally Closed
The LVH-200 series has been discontinued. Please see the LVN90 as a possible alternative or contact our Flow Engineering department.
The OMEGA™ LVH-200 single
station horizontal level switch
is cost effective for level control
applications in small tanks where
it is more convenient to install a
level switch through the sidewall
of the tank. When the float arm is
raised to the switch housing, the
switch is activated. As the float
drops away from the housing, it is
deactivated. The movement of the
float brings the imbedded magnet
into close proximity to the
encapsulated reed switch,
causing it to actuate. The contact
function may be selected as either
normally open or normally closed.
When triggering inductive or
capacitive loads, use the LVH-200
with external solid state relays.
Accuracy: ±5 mm in water Repeatability: ±2 mm in water Reed Type: dry contact, SPST Thread NPT: 1/2" Length, Overall: 114 mm (4.5") Float Diameter: 18 mm (0.70") Max. Temperature: -40 to 107 Degrees C
(-40 to 225 Degrees F) Cable: 60 cm (2'), 2 wire 22 gauge Max. Pressure Rating: 100 psi Min. Sp. Gravity Liquid: 0.55 Max. Switching Current:
20 VA @ 120 Vac (CE: 30 Vrms and
42.2 Vpeak or 60 Vdc) Signal Output: Dry switch closure,
selectable NO or NC states Orientation: Horizontal
注: Comes complete with operator’s manual.
Ordering Example: (1) LVH-200 Horizontal installation single station horizontal level switch, ¥6,318
We noticed you are from the US. Visit your local site for regional offers and live support.