Guided Core with Removable Spring for Easy Installation
Note: This model is discontinued and is no longer available.
The LD640 Series digital output
displacement transducers have
improved IP67-rated sealing,
coupled with polymer guides with
rigid carriers. They are used in industrial automation controls requiring a digital signal. These units require either a LDN232 modules or the
DR601 digital display.
SPECIFICATIONS Linearity: <0.2% FSO Read Rate: Up to 3960 readings per second Bandwidth: Up to 460 Hz, depending on noise performance required Signal Output: RS485 serial communications Storage Temp: Probe Interface: -20 to 85°C (-4 to 185°F) Transducer: -40 to 120°C (-40 to 248°F) Operating Temp: Probe Interface: 0 to 60°C (32 to 140°F) Transducer: -40 to 120°C (-40 to 248°F) Sealing: Probe Interface: IP43 Transducer: IP67 Vibration (Sinusoidal Frequency): 0 to 50 Hz: 1 to 10 g rms linear Amplitude 50 Hz to 1 kHz: 10 g rms Amplitude Shock: Drop Testing: 1 m (3') onto hard surface Topple Testing: 10 times each end onto hard surface Cable: PFA, 2 m (6') long Integral Electronics Module: Supplied Core Material: Nickel-iron
注: For compatible instrumentation see links below for DR601 and LDN232.