The JBox Load Cell Summing Series has been discontinued. Please see the SBJ Series or the JBOX4 Series as possible alternatives or contact our Pressure Engineering department.
A J-BOX takes the input from multiple load cells and sums them in parallel to form a single output equal to the sum of the forces on the load cells. Summing is a common practice in industry, as most tanks, bins, hoppers and platforms are often supported by 2, 3 or 4 load cells which are used to give the total weight being monitored. All load cells should be of the same capacity and have interchangeability rated outputs within 3.3% of each other. OMEGA ® load cells LC101, LCCA, LCCB, LCJA, LCJB, LC501, LCDA, LCDB and LCTB have interchangeability specifications better than 3.3%. Load cells with larger interchangeability specifications can be used with the J-Boxes; however, user supplied external resistors must be added
SPECIFICATIONS Weight: JBOX-2 & 4: 7 lb; JBOX-6 & 8: 10 lb; JBOX-10: 15 lb Span: 3.3% adjustment; larger adjustment requires external resistors Feedthroughs: Compression, 0.125 to 0.25" dia. wire Lead Wire: 22 ft 6-connector shielded jacketed wire, 22 gage Case: Epoxy coated carbon steel Dimensions: JBOX-2 & 4 (9 x 6 x 3") (229 x 152 x 76 mm) JBOX-6 & 8 (11 x 8 x 4") (279 x 203 x 102 mm) JBOX-10 (13 x 10 x 5") (330 x 254 x 127 mm)
The JBox Load Cell Summing Series has been discontinued. Please see the SBJ Series or the JBOX4 Series as possible alternatives or contact our Pressure Engineering department.
Ordering Example: (1) DP41-S digital display, makes a complete two load cell system with 5,000 lb capacity, ¥135,828 plus (2) LC501-500 two 2,500 lb load cells, ¥115,2400 , ¥135,828 + 115,240 X 2 = ¥366,308
We noticed you are from the US. Visit your local site for regional offers and live support.
