The FPUDX1700 series has been discontinued. Please contact our Flow Engineering department.
FPUDX1700 Series duplex head injector pumps feature dual, side-mounted heavy-duty cartridge valve heads.
This durable liquid end is injection molded of polypropylene and includes: Double-sealed PVDF cartridge valve fittings,
FKM O-ring seals, ceramic ball checks, Hastelloy valve springs, and a PTFE /EPDM diaphragm. Each head is independently
controlled by an easy-to-adjust, top-mounted feed adjustment. These pumps are suitable for a variety of applications,
including: to inject different amounts of simular chemicals into separate systems; feed two different chemicals into the same
system or feed different chemicals into separate systems; or when a single-head pump does not provide sufficient output.
SPECIFICATIONS Output Accuracy: ±10% of maximum [water @ 21°C (70°F) and 1.5 m (5') suction lift] O-Ring: FKM standard; ethylene propylene, silicone optional Turndown Ratio: 10:1 Power: 115/60 Hz, optional 230V/60 Hz, 220V/50 Hz, 24 V/60 Hz Dimensions: 241 H x 191 W x 102 mm D (9.5 x 7.5 x 4") Shipping Weight: 4.5 kg (10 lb) Tube Dimensions:3⁄8" OD, ¼" ID Max Fluid Temperature: 54°C (130°F) Enclosure: NEMA 3R (IP24) (acceptable for outdoor use) Max Viscosity: 1000 centipoise Max Suction Lift: Up to 3 m (10') of water
注: Comes complete with check valves, flow indicator, injection and foot valves, 1.5 m (5') each of vinyl suction tubing and polyethylene discharge tubing, and operator’s manual.
For 230 V/60 Hz, add suffix "-230V60" to model number; add $10 to price.
For 220 V/50 Hz, add suffix "-220V50" to model number (Max. GPD decreases by 20%), add $10 to price.
For 24 V/60 Hz, add suffix "-24V60" to model number; add $10 to price.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
We noticed you are from the US. Visit your local site for regional offers and live support.