The FPU100 series has been discontinued. Please see the FPU400 Series as a possible alternative or contact our Flow Engineering Department.
FPU100 Series peristaltic pumps offer simplicity at a
reduced cost. The UL-listed AC or DC motor turns the
rollers, which squeeze fluid through the precision-bore
high-tolerance tubing in a wavelike motion, acting like
a positive displacement pump. The fluid doesn’t touch
the pump; it only comes into contact with the tubing.
This makes the pump suitable for fluids carrying small
particles. FPU100 pumps continuously overocclude
the tubing, which makes the pump self-priming and
non-siphoning. They are easy to maintain, with few
moving parts and no seals or valves to clog, clean,
or replace. As one section of tube fatigues, just move
the tubing to a section that hasn’t been under the
rollers and continue pumping. Or simply replace the
supplied tubing. The replacement 230 mm (9") lengths of precision-bore tubing ensure repeatable pumping
rates time after time. The pumps are supplied with
tubing that has polyethylene union connectors for
hooking up system tubing. The replacement 230 mm
(9") lengths of tubing come without connectors. The
pumps are supplied standard with a mounting panel.
The AC-powered pumps are also available in a rugged
polycarbonate enclosure for bench mounting. Maximum
backpressure is 15 psi without derating (up to 25 psi
@ 75% of maximum flow). Maximum suction head is
8.5 m (28'). Flow rate repeatability from one pump to
the next or when replacing tubing is within 8% of
maximum flow rate listed. Shipping weight is 1.6 kg
(3.5 lb) for all sizes. These pumps are ideal for
metering/dosing, repetitive dispensing, and general
liquid/gas transfer, and they have a 100% duty cycle
for continuous operation.
Benchtop Case Available
The AC-powered pumps are also
available in a rugged polycarbonate
enclosure with on/off switch, power
indicator lamp, and rubber feet for
benchtop use. Each is supplied with
a 1.8 m (6'), 115 Vac, 3-wire cord.
To order, select the desired pump.
Add suffix "-CASE" to model
number and add $75 to price. For
240 Vac models with European
plug, consult OMEGA’s Flow
Department. An optional 24-hour
timer with momentary "on" switch for
priming the pump is also available
for the case unit. The timer is
settable up to 24 hours in increments
of 15 minutes by internal DIP
switches. To order case unit with
timer for 115 Vac, add suffix
"-CASE-CT" to model number and
add $95 to price.
SPECIFICATIONS (FPU100) Mounting Plate: 94 L x 130 W x 109 mm D (3.74 x 5.12 x 4.28"); 5.6 mm (0.22") diameter holes are centered 76 x 110 mm (3.0 x 4.34") on the plate For units with rear fan: 130 L x 130 W x 135 mm D (5.11 x 5.12 x 5.28") overall Case: 152 H x 152 W x 102 mm D (6 x 6 x 4") Shipping Weight: 1.6 kg (3.5 lb) Ambient Temp Range: 20 to 30°C (68 to 86°F) Max Liquid Viscosity: 8500 cp
SPECIFICATIONS (FPU4500) Electrical: 115 Vac/60 Hz Flow Rate: 2000 mL/min (78.6 oz) Mounting: 12-gage zinc-plated steel mounting plate (included) Dimensions: 140 H x 116 W x 191 mm D (5.5 x 4.6 x 7.5") Shipping Weight: 2.4 kg (5.3 lb)
注: Comes complete with operator’s manual. * The FPU4500 comes with Norprene tubing. FPU4500 not available in case.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
We noticed you are from the US. Visit your local site for regional offers and live support.