When you want it all in one flow sensor, you want the FP-6000 sensor. accuracy...durability versatility...
easy installation... low cost - the FP-6000 gives you all this.
The FP-6000 accurately measures a wide variety of fluids with flowrates as low as 1.6 feet per second
up to 20 feet per second. It generates a sine-wave frequency output linearly proportional to flowrate
with ±0.2 fps accuracy. The FP-6000 is versatile, adjusting to various pipe sizes. There is no
need to buy a different sensor for every change in pipe size. You can position the FP-6000 to give you
accurate readings in any size pipe (1½ to 36"), permitting tremendous cost savings.
No special fittings are required. A standard 1½" threadolet or saddle fitting is all you need.
Made of rugged brass, the FP-6000 can handle harsh environments. The output signal can be sent up to
30 m (100') without amplification. Each FP-6000 sensor comes with a 7.5 m (25') cable and all necessary
Output Signal: Sine wave, 80 mV p-p/fps Output Frequency: 11 Hz/fps Source Impedance: 10,000 Ω Flow Rate Range: 1.6 to 20 feet per second (fps) Linearity: ±1% of full range Repeatability: ±0.5% of full range Maximum Operating Pressure: 225 psi Maximum Operating Temperature: 100°C (212°F) Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity
MATERIALS - Sensor Rotor: CD4MCu Stainless Steel Rotor Shaft: Tungsten Carbide Steel Transducer Body: C 36000 Brass Bearing: Carbon/graphite filled fluoroplastic (Fluoroloy B) Fitting Housing & Cover: Brass Seal: FKM O-Ring Shipping Weight: 2.7 kg (6 lb) Dimensions: From flange to rotor pin, 151 mm (5.94"), overall cable type twisted pair with foil shield Connection: 1½ NPT or 1.5" ISO Cable Length: 7.5 m (25')
† このサイトの金額はすべて日本円（税抜）で表示しています 注: Comes complete with operator's manual.