カート  |  お問い合わせ  | 
フリーダイヤル 0120-971-357
海外からのお問合せ+81-3-5244-4675

FP-319

The Downtime Eliminator: Wet Tap Valve Assemblies | FP-319

The Downtime Eliminator: Wet Tap Valve Assemblies

スクロールダウンし、全ラインアップをご覧ください

2 year warranty
  • Temperature Rating: 60°C (140°F) @ 25 psig
  • Pressure Rating: 100 psig max
    @ 20°C (68°F)
  • Eliminates Down Time
タービン流量計 (羽根車式) - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

You can completely eliminate downtime resulting from flow sensor maintenance with the simple addition of OMEGA’s FP-319 Wet Tap Valve Assembly. The FP-319 serves as a unique interface between your OMEGA sensor and matched sensor installation fitting. It provides you with a safe and fast method of removing a specially extended sensor from your pipe, under normal operating pressures. Additionally, the molded PVC design of the Wet Tap Assembly makes it resistant to corrosion and chemical attack by acids, alkalies, salt solutions, and many other harsh chemicals. When ordering the Wet Tap Assembly, you can choose from two OMEGA flow sensor models. The Paddlewheel Flow Sensor features a patented “open-cell” rotor, resulting in ±1% linearity over the full flow range.

SPECIFICATIONS
Pressure Rating: 100 psig max @ 20°C (68°F)
Temperature Rating: 60°C (140°F) @ 25 psig
Recommended Installation/Removal Pressure: 25 psig @ 22°C (72°F) max
Weight: 1.8 kg (4 lb)
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
Quick Ship
FP-319
お問い合せ下さい   
納期: 
 
 
None Wet-tap valve assembly
Quick Ship
FP-3193
お問い合せ下さい   
納期: 
 
 
FP-5300 PVC Polypropylene Titanium Black PVDF 0.5 to 4
Quick Ship
FP-3195
お問い合せ下さい   
納期: 
 
 
FP-5302 PVC Polypropylene Titanium Black PVDF 10 to 36
このサイトの金額はすべて日本円(税抜)で表示しています
注: Comes complete with operator's manual.

FP-5300 sensor and FP-5600 sensor are physically interchangeable. They are not electrically interchangeable. The FP-5300 sensor is self-powered and can be used with all OMEGA™ offered paddlewheels. The minimum flow rate is 1 FPS. The FP-5600 is a low flow Hall Effect sensor paddlewheel. The FP-5600 sensor has a minimum flow rate of 0.3 FPS and requires DC voltage.