PORTABLE MASS FLOWMETER AND CALIBRATION KIT

FMA-PC16

Portable Mass Flowmeter and Calibration Kit

^¥1,508,810 FMA-PC16040509

注文する

Ranges of 0 to 0.5 SCCM up to 0 to 1500 SLM
<10 ms Response Time—Field Adjustable
30+ Gas Calibrations, Including Air, Ar, CH4, CO, CO2, Ethane, H2, He, N2, N2O, Neon, O2, Propane, Butane, Iso-Butane, Acetylene, Ethylene, Krypton, Xenon, and Sulfur Hexafluoride
Pressure, Temperature and Volumetric and Mass Flow Simultaneously Displayed
NIST 5-Point Certificate Included
No Straight Runs of Pipe Required
RS232 and USB Standard

質量流量計 (マスフローメータ) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Omega’s FMA-PC16 Series portable digital mass flowmeters accurately and rapidly measure the mass flow rate, volumetric flow rate, pressure and temperature of process gases.

The FMA-PC16 couples the FMA-1600A Series meter with fittings and tubing to create a portable gas chromatography calibrator.

Omega’s FMA-PC16 Series portable calibration units combine up to three FMA-1600A Series or FMA-LP1600A Series mass flowmeters with totalizers and high-accuracy calibration inside a rugged industrial carrying case with its own power supply and battery.

FMA-PC16 units include integrated push-connect fittings for each meter and flow software. At the heart of Omega’s mass flowmeters and calibrators is an internally compensated, laminar differential pressure measurement technology that yields linear results over a very wide flow range. This produces volumetric and mass flow data that is fully compensated for changes in pressure and temperature and corrected for the user’s STP. All portable mass flowmeters and calibrators come with NIST-traceable calibration sheets and excellent customer support, including technical phone support.

Omega’s FMA-1600A Series and FMA-PC16 Series mass flowmeters feature large integrated displays with touchpad accessible gas selection from 30 user-selectable gas calibrations and both analog and RS232 digital communications.

Specifications
Accuracy: Calibration conditions after tare ±(0.8% of reading ± 0.2% of full scale)
High Accuracy: Calibration conditions after tare ±(0.4% of reading ± 0.2% of full scale)
High Accuracy: Option not available for units ranged under 5 scm or over 500 slpm
Repeatability: ±0.2% full scale
Zero Shift and Span Shift: 0.02% full scale/°Celsius/Atm
Operating Range/Turndown Ratio 0.5% to 100%
Full Scale/200: 1 turndown
Maximum Measurable Flow Rate: 128% full scale
Typical Response Time: 10 ms (adjustable)
Warm-Up Time: <1 second
Mass Reference Conditions (STP): 25°C (77°F) and 14.696 psia (standard-others available on request)
Operating Temperature: -10 to 50°C
Humidity Range: (Non-Condensing) 0 to 100%
Maximum Pressure: 145 psig [50 psig (-LP option)]
Ingress Protection: IP40
Wetted Materials: 303 and 302 stainless steel, FKM, Silicone RTV (Rubber), Glass Reinforced Nylon, Aluminum
Note: If your application demands a different material, please contact Omega. Do not subject FMA-LP1600A differential pressure sensor to upstream-downstream pressure differentials exceeding 15 psid.
Programmed Gases: Acetylene, Air, Argon, Butane, Carbon Dioxide, Carbon Monoxide, Ethane, Ethylene, Helium, Hydrogen, Iso-Butane, Krypton, Methane, Neon, Nitrogen, Nitrous Oxide, Oxygen, Propane, Sulfur Hexafluoride, Xenon, A-25, A-75, A1025, C-2, C-8, C-10, C-25, C-75, P-5, Star29
LCD Display: Monochrome with integrated touchpad simultaneously displays mass flow, volumetric flow, pressure and temperature
Digital Output: RS232 and USB Serial
Electrical Supply: 4 AA batteries, 9 to 20 Vdc wall outlet adaptor minimum 150 mA
Note: The digital output signal communicates mass flow, volumetric flow, pressure and temperature.
Weight: 5.4 to 9.1 kg (12 to 20 lb), depending on configuration
Case Dimensions: 406 L x 330 W x 178 mm D (16 x 13 x 7")
Process Connections: 1/8, ¼, 3/8; or ½" push-connect style tubing fittings

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

FMA-PC16031908

¥1,642,509 (税込)
(税抜価格 ¥1,493,190)

納期: 11 週間

Portable mass flow calibration kit 10 SCCM 500 SCCM 20 SLM

FMA-PC16040509

¥1,659,691 (税込)
(税抜価格 ¥1,508,810)

納期: 12 週間

Portable mass flow calibration kit 50 SCCM 2 SLM 50 SLM

FMA-PC16190712

¥1,356,058 (税込)
(税抜価格 ¥1,232,780)

納期: 11 週間

Portable mass flow calibration kit 500 SCCM 10 SLM 500 SLM

注: Comes complete with software, NIST 5-point calibration and operator’s manual. Special ranges are available, the part numbering consists of the base model (FMA-PC16AABBCC) with the two digit range codes replacing the AA, BB and CC for each range unit required. Example: FMA-PC16191221 would be a portable mass flow calibration kit with 500 SCCM, 500 SLM, and 1500 SLM ranges. Contact Omega for pricing.