The FL-1800 Series has been discontinued.
Please see the FL-3000 and 3100
Series as a possible alternative or contact our Flow Engineering department.
OMEGA™ FL-1800 Series Flowmeters are designed for use with corrosive materials. These special flowmeters utilize PVDF and glass wetted parts for excellent corrosion resistance where standard variable area flow meters would be unacceptable. Because of this construction, these flowmeters can be used with most acids and bases, in addition to working with many organic solvents.
SPECIFICATIONS Scales: 150 mm (5.9"), 0 to 150 mm with correlation charts for air and water Accuracy: ±5% full scale Repeatability: ±0.5% full scale Connections: ¼ NPT, female horizontal Metering Tubes: Borosilicate glass Floats: Glass End Fittings, Seal Spindle: PVDF Side Plates: Aluminum Float Stops: PTFE Tube Packing: FKM O-Rings: FKM Max Pressure: 10.34 bar (150 psig) at 38°C (100°F)
注: Comes complete with correlation charts for air and water, and operator's manual.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)