The EZM series has been discontinued. Please see the AU-PTV as a possible alternative or contact our Automation Engineering department.
Easy connect to EZPLC for extremely low cost stand-alone production monitoring
system. Combination of EZPLC and EZMarquee make a terrific system which
pays for itself in less than 90 days! Monitor rate per hour, up-time/down-time,
pass rate, alarms and archive data.
Monitor 8 Analog Process Variables, Display on a Tri-color Marquee and Turn 4 Alarms ON
Let’s read 4-20mA current signals from up to 8 different temperature/pressure flow gauges, scale
the readings, display on a 2" red LED marquee, and activate up to 4 Relay outputs for your alarms
and sirens when your process readings exceed programmed limits.
The following stand alone system lets you take 4-20mA current inputs from up to 8 different
analog signals. All these sensors will feed input signal to EZPLC which is connected to
EZMarquee via RS232/485 communication port. EZPLC can be used to scale all the inputs and
display them on a 2" red LED marquee and can also turn Relay outputs to trigger alarms/sirens
Take input feed from up to 8 Analog devices (pressure transducer, LVDT,
etc), where you can display your process variables on a 2" EZMarquee via RS232/422/485. You
also get 4 Relay outputs (AC/DC) to trigger sirens/alarms when your process variables go over
your set points!
We noticed you are from the US. Visit your local site for regional offers and live support.