カート  |  お問い合わせ  | 
フリーダイヤル 0120-971-357
海外からのお問合せ+81-3-5244-4675

Channel Strip Heaters, Ceramic Insulated, 15.88 x 6.35 mm (5/8 x 1/4")

CSH1

Channel Strip Heaters Ceramic Insulated | CSH1

Channel Strip Heaters Ceramic Insulated

スクロールダウンし、全ラインアップをご覧ください

RoHS
  • A Reliable Heat Source with Seamless Stainless Steel Sheath
  • Flat Surface Mounting Installations
  • Used in Hundreds of Industrial and Commercial Heating Applications
  • Ovens
  • Hot Plates
  • Dies
  • Molds
  • Drying
  • Melting
  • Baking
  • Incubators
  • Platens
  • Food Warmers
  • Welding Preheating
  • Air Heating
  • Sealing Bars
  • Thermoforming
  • Tank Heating
ストリップヒータ - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area.
For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.

Specification
PERFORMANCE RATINGS
Maximum Sheath Temperature: 650°C (1200°F)
Nominal Watt Density: 20 Watts/in² (3.1 Watts/cm²)
Maximum Watt Density: 45 Watts/in² (dependent on design parameters)
ELECTRICAL SPECIFICATIONS
Maximum Voltage: 480 Vac (dependent on design parameters)
Maximum Recommended Voltage with Leads: 480V
Maximum Amperage:
    Lead Wire Termination: 10 amp
    Screw Terminations: 10-32UNF—25 amp
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
PHYSICAL SIZE CONSTRUCTION LIMITATIONS
Width:
    16 mm (5/8") Wide Heaters: +0.000, -0.005"
    25 mm and 38 mm (1 and 11/2") Wide Heaters: +0.000, -0.010"
Thickness:
    6 mm (1/4") Thick Heaters: +0.000, –0.005"
    8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008" [10 mm (3/8") thick heaters have radius corners]
Length:
    Up to 24": ±1/16"
    Over 24": ±1/8 "
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Special Bushings: 13 x 16 mm (1/2 × 5/8")

Model No. Length Wattage Watt Density Type
120V 240V in mm Watt/in2 Watt/cm2
CSH00001 112 38.1 50 29 4 L
CSH00002 2 50.8 50 19 3 L
CSH00003 3 76.2 150 34 5 L
CSH00004 3 76.2 150 34 5 L1
CSH00005 4 101.6 200 33 5 L
CSH00006 5 127.0 240 30 5 L
CSH00007 CSH00008 5 127.0 240 30 5 L1
CSH00009 7 177.8 250 22 3 L1
CSH00010 CSH00011 9 228.6 350 24 4 L
CSH00012 9 228.6 350 24 4 L1
CSH00013 12 304.8 500 25 4 L
CSH00014 13 330.2 500 23 4 L
CSH00015 14 355.6 550 23 4 L1
CSH00016 18 457.2 900 29 5 L
CSH00017 CSH00018 18 457.2 900 29 5 L1
CSH00019 CSH00020 20 508.0 1000 29 5 L1
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
RoHS
商品説明
Quick Ship
CSH00001
お問い合せ下さい   
納期: 
 
RoHS compliant
120 Volt, 50 Watts, 1 1/2" Long, Type L
Quick Ship
CSH00005
お問い合せ下さい   
納期: 
 
RoHS compliant
120 Volt, 200 Watts, 4" Long, Type L
Quick Ship
CSH00009
お問い合せ下さい   
納期: 
 
RoHS compliant
120 Volt, 250 Watts, 7" Long, Type L
Quick Ship
CSH00019
お問い合せ下さい   
納期: 
 
RoHS compliant
120 Volt, 1000 Watts, 20" Long, Type L1
Quick Ship
CSH00003
お問い合せ下さい   
納期: 
 
RoHS compliant
240 Volt, 150 Watts, 3" Long, Type L
Quick Ship
CSH00013
お問い合せ下さい   
納期: 
 
RoHS compliant
240 Volt, 500 Watts, 12" Long, Type L
Quick Ship
CSH00020
お問い合せ下さい   
納期: 
 
RoHS compliant
240 Volt, 1000 Watts, 20" Long, Type L1

クイックオーダー

部品番号
注文数
部品番号
注文数


このサイトの金額はすべて日本円(税抜)で表示しています
注: Part numbers shown are for heaters with Type L Termination with 254 mm (10") plain leads or Type L1 Termination with 254 mm (10") plain leads. Additional available terminations: Type R2 and Type W1 Mounting tabs are not available on this size.