Model CLH-II mA Loop Calibrator
Discontinued

CLH-II

Model CLH-II mA Loop Calibrator

スクロールダウンし、全ラインアップをご覧ください

注文する

Sources and Reads Milliamps
Simulates 2-Wire Transmitters
Powers and Reads 2-Wire Transmitters
Reads and Simulates DP-transmitters in Percent Flow
Fixed Calibration Currents
Auto-Stepping for Hands-Free Calibration
Auto-Ramp Cycling for Endurance Tests
Fixed Currents for Valve Stroking

商品説明

The CLH-II is no longer available. Please review the CL530 Series or the CA-150 Series as potential substitutes, or contact our Temperature Engineering Department.

CLH-II can power (24 Vdc) and read 2-wire transmitters to perform field calibration. Output currents are adjustable with a 10 microamp resolution in both source and transmitter simulation mode.

RAMPING: The calibrator can source or simulate with high resolution a continuous up/down cycling between 4 and 20 mA or 0 and 20 mA. The travel time between limits is 60 seconds.

READING IN PERCENT: The calibrator can display readings in percent of a 4-20 mA or 0-20 mA span. Unit also reads or simulates dP-transmitters directly in percent of flow.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

CLH-II

お問い合せ下さい

納期:

mA Loop Calibrator

CLHPS

お問い合せ下さい

納期:

110V/60Hz power adaptor