フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

Circulation Heaters for Clean Water, Aqueous Solutions | CHF9

CHF9 Series

Circulation Heaters | CHF9 | CHF9 Series

Circulation Heaters | CHF9

スクロールダウンし、全ラインアップをご覧ください

  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.

商品説明

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2)—Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe Size Dimensional Drawing Number KW Model Number Approx Weight
120V 240V-1Ph (C*) 240V-3Ph (C*) 480V-1Ph (C*) 480V-3Ph (C*) lb kg
2½ NPT 3 elements 2.2 2 CHF01100 (1) CHF01101 (1) 37 17
2.3 3 CHF01102 (1) CHF01101 (1) 46 21
3"—150 lb 3 elements 3.2 2 CHF01104 (1) CHF01105 (1) 62 28
3.3 3 CHF01106 (1) CHF01107 (1) 76 34
(C*) = Number of Branch Circuits per heater
Typical Applications: Clean Water, Aqueous Solutions
Vessel Material Model No. 120/240V KW “A” OAL “B” Inlet/Outlet Approx Weight
inch mm inch mm lb kg
Carbon Steel CHF02097 1.5 18 457 1238 314 8 3.6
CHF02098 2.0 18 457 1238 314 8 3.6
CHF02099 2.5 22 559 1638 416 11 5.0
CHF02100 3.0 22 559 1638 416 11 5.0
Bronze CHF02101 1.5 18 457 1238 314 12.5 5.7
CHF02102 2.0 18 457 1238 314 12.5 5.7
CHF02103 2.5 22 559 1638 416 14.5 6.6
CHF02104 3.0 22 559 1638 416 14.5 6.6
Ordering Example: CHF02098, 2 KW, 240 Vac circulation heater.
Typical Applications: Lubricating Oils
Vessel Material Model No. 120/240V KW “A” OAL “B” Inlet/Outlet Approx Weight
inch mm inch mm lb kg
Carbon Steel CHF02105 0.5 22 559 1638 416 11 5.0
CHF02106 0.75 22 559 1638 416 11 5.0
CHF02107 1.0 22 559 1638 416 11 5.0
Ordering Example: CHF02107, 1 KW, 120 Vac circulation heater.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
Vessel Material: Carbon Steel
CHF02097
¥172,310 (税込)
(税抜価格 ¥156,645)
納期: 7 週間
 
120/240V, 1.5 KW,8 lbs
CHF02100
¥206,135 (税込)
(税抜価格 ¥187,395)
納期: 2 週間
 
120/240V, 3 KW, 11 lbs
CHF02107
¥222,514 (税込)
(税抜価格 ¥202,285)
納期: 7 週間
 
120/240V, 1 KW, 11 lbs
Vessel Material: Bronze
CHF02101
¥210,304 (税込)
(税抜価格 ¥191,185)
納期: 7 週間
 
120/240V, 1.5 KW,12.5 lbs
CHF02104
お問い合せ下さい   
納期: 
 
 
120/240V, 3 KW,14.5 lbs

クイックオーダー

部品番号
注文数
部品番号
注文数


注: (C*) = Number of Branch Circuits per heater.
We noticed you are from the US. Visit your local site for regional offers and live support.