Electrodeless Conductivity Sensor for CDCN670 Series - Discontinued

CDE-3600 Series Discontinued

スクロールダウンし、全ラインアップをご覧ください

Wide Measuring Range 200 to 2,000,000 microSiemens/cm
Non-Conductive Chemically Resistive Wetted Materials
Low Maintenance
Convertible Sensor for Submersion or Mounting in 2-Inch Tee
Sanitary Models Available

商品説明

The CDE-3600 Series has been discontinued. Please see the CDCN-91 as a possible substitute or contact our pH and Environmental department.

Chemical resistance problems are simplified because only one wetted material contacts the process media. Furthermore, the wetted material is non-conductive, to electrically isolate the sensor from the process fluid, eliminating ground loops that can affect measurement accuracy. The electrodeless sensor design eliminates polarization and electrode coating problems that commonly affect conventional contacting electrode-type conductivity sensors.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Accessories

CDE-36048

お問い合せ下さい

納期:

304SS sanitary 2" tee and heavy duty clamp

CDE-36132

お問い合せ下さい

納期:

Spare sanitary clamp

CDE-36338S

お問い合せ下さい

納期:

Union mount hardware (for standard 2" tee) for Convertible sensor, 316SS union adaptor with 2" tee

CDE-3600-JBOX

お問い合せ下さい

納期:

Juction box for union mount

注: Standard cable length is 6 m (20'). Longer cable available. Specify length @ $1.75 per additional foot. To order separate cable, order CDE3600-CAB-(*) (*) Length of cable in feet; $1.80 ft (25 ft minimum)
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

製品マニュアル:

ダウンロード CDE-3600 Series - Electrodeless Cond. Sensors

ダウンロード CDCN674 - Electrodeless Analyzer