フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

Programmable Step Motor Indexer/Drive

1240i

Programmable Step Motor Indexer/Drive | 1240i

Programmable Step Motor Indexer/Drive

スクロールダウンし、全ラインアップをご覧ください

1 year warranty CE
  • Provides Up to 1.2 A per Phase and Microstepping to 50,800 Steps Per Revolution
  • Accepts 12 to 42 Vdc Power Supply
  • Connects by a Simple Cable to Your PC for Programming (Cable Included)
  • Microsoft Windows™-Based Software for Easy Setup and Programming (Free Download)
  • 8 Inputs, 3 Outputs
  • Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Cycle Counts and More
  • Compatible With Multi-Axis Controller HUB 444
  • CE Compliant
  • Sample Motion Programs Available by Request
モータ - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

The 1240i is a stand-alone programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier. The 1240i includes easy to use software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to four drives (stepper or Servo) can be networked using a single SiNet™ Hub 444. The 1240i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.
注文数
商品説明
Click to expand/minimize a list of what others bought with the1240i
1240i
お問い合せ下さい   
納期: 
 
 
Programmable step motor indexer drive
Recommended Motors
  
OMHT11-013
¥36,905 (税込)
(税抜価格 ¥33,550)
納期: 7 週間
 
NEMA 11 step motor, 15 oz-in holding torque
  
OM5014-842
お問い合せ下さい   
納期: 
 
 
NEMA 14 step motor, 26 oz-in holding torque
  
OMHT17-075
¥25,031 (税込)
(税抜価格 ¥22,755)
納期: 12 週間
 
NEMA 17 step motor, 62.8 oz-in holding torque
  
OMHT17-275
¥18,359 (税込)
(税抜価格 ¥16,690)
納期: 6 週間
 
NEMA 17 step motor, 62.3 oz-in holding torque
  
OMHT17-278
¥21,709 (税込)
(税抜価格 ¥19,735)
納期: 4 週間
 
NEMA 17 step motor, 113 oz-in holding torque, 1.0 A/phase (series connection)
  
OMHT23-393
お問い合せ下さい   
納期: 
 
 
NEMA 23 step motor, 76.6 oz-in holding torque
  
OMHT23-593
¥21,709 (税込)
(税抜価格 ¥19,735)
納期: 6 週間
 
NEMA 23 step motor, 79.3 oz-in holding torque
Accessories
  
MMI-01
お問い合せ下さい   
納期: 
 
 
Operator Interface
  
HUB 444 DIN RAIL
お問い合せ下さい   
納期: 
 
 
Multi-axis network hub with DIN rail mounting kit
Click to expand/minimize a list of what others bought with theOM-CONV-USB
OM-CONV-USB
¥5,172 (税込)
(税抜価格 ¥4,702)
納期: 2 週間
 
USB to RS232 Interface Converter; USB-A to DB9-male
Click to expand/minimize a list of what others bought with theOMPS150A24
OMPS150A24
お問い合せ下さい   
納期: 
 
 
Stepper drive power supply, 24 VDC, 6.3A
  
Power Cord-SE
¥2,574 (税込)
(税抜価格 ¥2,340)
納期: 5 週間
 
AC Power cord with stripped end termination
  
SI-PROG-CBL
¥6,688 (税込)
(税抜価格 ¥6,080)
納期: 2 週間
 
Replacement programming cable (comes with drive)
  
DRIVE-CBL
お問い合せ下さい   
納期: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
  
DSUB-9-MF
お問い合せ下さい   
納期: 
 
 
DIN rail interface module, 9-pin
  
DSUB-9-MF-CBL
¥10,252 (税込)
(税抜価格 ¥9,320)
納期: 2 週間
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
注: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example:  (1) OMHT17-075 NEMA 17 step motor, 62.8 oz-in holding torque, ¥22,755 

製品マニュアル:

ダウンロード 1240i Series - Programmable Step Motor Driver
ダウンロード STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives
We noticed you are from the US. Visit your local site for regional offers and live support.