Ceramic Insulated Finned Channel Strip Enclosure Heaters

EHF Series

スクロールダウンし、全ラインアップをご覧ください

注文する

10-32 offset screw terminals (T4 style) standard, other terminations available
UL recognized component
Stainless steel sheath and fins
Easy installation with special enclosure mounting brackets
Rugged, Durable Construction
Stainless Steel Sheath
Nickel-Plated Steel Fins (Stainless Steel Optional)
Various Terminations
Trouble-Free Installation
Various Sizes in Stock

ストリップヒータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

OMEGA™ finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens).
The finned strip heater’s basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air.
OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specifications.

Specifications and Tolerances
Performance Ratings
Maximum Sheath Temperature: 650°C (1200°F)
Electrical Specifications
Maximum Voltage: 480 Vac (when applicable)
Maximum Amperage: 25 A
Resistance Tolerance: 10%, -5%
Wattage Tolerance: 5%, -10%
Material Specifications and Physical Sizes
Sheath: 304 stainless steel
Fins: Nickel plated steel (stainless steel optional)
Screw Terminals: Stainless steel 10-32 UNF threads
Width Including Fins: 51 mm (2")
Height Including Fins: 35 mm (13/8")
Length Tolerance: Up to 0.61 m (24") ±1/16", over 0.61 m (24") ±1/8"
Mounting Slot Size: Standard 8 x 13 mm (5/16 × 1/2")
Slot Size For Secondary Insulating Bushing: 13 x 16 mm (1/2 × 5/8") for 300V and above

Model No.		Overall Length	Mounting Dimension	Watts
120V	240V	Overall Length	Mounting Dimension	Watts
EHF00001	EHF00002	12.125	11.375	200
EHF00003	EHF00004	15.625	14.875	350
EHF00005	EHF00006	19.5	18.75	450
EHF00007	EHF00008	25.375	24.625	700
Ordering Example: EHF00001, 200 watt, 120 Vac, finned strip enclosure heater.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

EHF00001

¥36,834 (税込)
(税抜価格 ¥33,485)

納期: 7 週間

120 Volt, 200 Watts, Overall Length: 12.125 Inches

EHF00007

¥57,860 (税込)
(税抜価格 ¥52,600)

納期: 5 週間

120 Volt, 700 Watts, Overall Length: 23.375 Inches

EHF00002

¥36,130 (税込)
(税抜価格 ¥32,845)

納期: 5 週間

240 Volt, 200 Watts, Overall Length: 12.125 Inches

EHF00008

お問い合せ下さい

納期:

240 Volt, 700 Watts, Overall Length: 24.375Inches

クイックオーダー

部品番号

注文数

部品番号

注文数

Ordering Example: (1) EHF00002 240 Volt, 200 Watts, Overall Length: 12.125 Inches, ¥32,845